The toilet is a thing that people use in their daily life. Because it has very good function and decoration, it is loved by many people and is a bathroom product that people like very much. But the type and working principle of the toilet should not be very well understood, so there are always many problems when choosing. Today, Xiaobian brought a few toilet schematics for everyone . By the way, let us know how the toilet works and the precautions for use. How the toilet works 1, straight-through type The flush toilet uses the impulse of the water flow to discharge the dirt. Generally, the pool wall is relatively steep, and the water storage area is relatively small. Thus, the hydraulic concentration is concentrated, and the water pressure falling around the circle is increased, and the sewage efficiency is very high. With the large thrust formed by the compressed air, the flushing speed is fast, the impulse is large, the sewage is strong, the speed is fast, the water is used less, and the water is not leaked. The straight-through type uses a strong kinetic energy of the water flow, so the sound of the impact tube wall is relatively large. 2, siphon type The structure of the siphonic toilet is a “∽†type of drainage pipe. When the drainage pipe is filled with water, a certain water level difference will be generated. The suction generated by the flushing water in the sewage pipe in the toilet will be drained away, due to the siphonic toilet. Whether the flushing is caused by the flow of water, the pool has a large water surface and a small flushing noise. The siphonic toilet is also divided into a vortex siphon and a jet siphon. What should I pay attention to when using the toilet? 1. flush the toilet cover This detail is easily overlooked. If the toilet lid is opened when flushing, the instantaneous cyclone in the toilet will bring bacteria or microorganisms into the air 6 meters high, and will stay in the air for several hours, then fall on the wall and toothbrush, Cups, towels, etc. So develop the habit of covering the toilet when flushing. 2, the toilet ring bacteria should focus on cleaning Many people may not know that the most serious pollution is the toilet seat, and this most polluted place happens to be the most “intimate†place for people to touch the skin. Therefore, it is important to clean it and use it every few days. Wipe with household disinfectant to keep the toilet seat clean. 3, the dirty inside the toilet is cleaned in time The dirt inside the toilet should be cleaned in time, otherwise it will easily form stains, and it will also breed bacteria. When cleaning, please lift the toilet seat, then spray the interior with the toilet agent, and then brush the toilet brush thoroughly after a few minutes. It is best to use a thin brush to better clean the inner edge of the toilet and the depth of the pipe. The above content is the introduction of the working principle and usage precautions of the toilet brought to you by this small series for your reference. I believe that after reading this article, you will have a certain understanding of the toilet schematic, and hope to provide some advice to friends who are choosing a toilet. For more exciting home improvement content, please continue to pay attention to the decoration home network. Pu Handbag ,Pu Hand Bag,Lady Pu Handbag,Pu Leather Tote Handbag GUANGZHOU KOEDS LEATHER LIMITED , https://www.kodes-bag.com