Starry Sky Cabin,Mini Karaoke Booth,Mini Soundproof Booth For Pets,Acoustic Pet Room Guangzhou Mingli Intelligent Equipment Co.,Ltd , https://www.minglibooth.com
For thermal transfer paper printers, the tail line of the last unit cannot coincide with the tail line on the previous units. After repeated inspections, it was found that when the pick-up chain pick-up paper was picked up from the gripper's gripper on the last unit, the entire stack of gripper paper was not even enough, and it was not synchronized at the pick-up position. paper. The paper-feeding force at both ends of the paper-feeding fangs is loose and the middle is tight, so that when the paper-feeding chain crepe paper is picked up from the back half of the blanket cylinder, it is not flatly peeled off, but the paper is pulled from the left and right sides. Shrinking toward the center, resulting in inaccurate overprinting of the tip of the thermal transfer paper.
Solution:
First remember the faulty row of grippers and jog the machine to the back of the machine. Then adjust the crepe force of the entire row of crepe papers one by one, and require the crepe paper force of all the crepe paper teeth to be consistent. After the adjustment, the test paper is printed and the fault can be eliminated. This can solve the problem of inaccurate overprinting of the thermal transfer paper.
Why is the printer not printing over the end of the printed thermal transfer paper? In fact, many of the newcomers who are engaged in this problem will encounter such problems, and at the end they do not know how to solve them. To this end, Guangzhou Big Elephant thermal transfer paper manufacturers bring solutions to this problem for the majority of new users, hoping to help new and old users who encounter this problem.