First, look at the interface. The solid wood furniture is fixed by rivet rivet, the process is good, and the interface is intimate and smooth. If there is a difference, there is a gap between the interfaces, which is not close, and the hand feels burr. Second, the door seams, drawer joints are called. Doors and doors, doors and frames, the gap between the drawer and the frame, the quality is required to be between 1.5-2 mm, and the gap should be evenly called. Third, switch the door panel to see if the closure is stable. Fourth, see if the surface paint is smooth. Special observation of the side of the furniture (these places are easy to sloppy), whether to hang paint. If there is hanging paint, the craft is not enough. Sofa Sets,sofa set for living room,recliner sofa set,leather sofa set Guangzhou LoPhiDa Co.Ltd , https://www.gdwidinlsa.com