All screen printing ceramic binders contain a binder resin that must be oxidized before the pigments are melted when the printed material is baked. Otherwise, the binder will burn the remaining carbon with the pigment. React to dilute the color of the pigment and reduce its gloss. Reprinted from: Graphic Arts
Round Bronze Match Light Kit from features their unique Oil Rubbed Bronze finish.
Aluminum alloy handle on side door with key
Packaging & Shipping
The kiln must maintain an oxidizing atmosphere, especially when the printed product is in the baking temperature range of 300-450°C. If a continuous kiln is used, the kiln can be ventilated through the chimney to ensure that the entire baking temperature zone maintains a perfect oxidizing atmosphere. The intermittent kiln can maintain the oxidizing atmosphere in the kiln through ventilation at the door and top vents.
Electric heating kiln is unanimously optimistic, because its heat source will not cause pollution to the air in the kiln. With gas kilns or oil kilns, glass products are surrounded by contaminated air when baked.
The baking time depends on the type of kiln and the quality, size and shape of the kiln. Generally, the temperature rise from the room temperature to the maximum baking temperature of at least 1 hour is required to ensure that the resin in the ink binder is completely burned before the pigment is melted. However, if there are enough vent holes in the kiln, the warm-up time can be shortened. Baking at the highest temperature for about 10 minutes will facilitate the full appearance of the pattern color and brightness. The cooling rate depends on the thermal stability requirements of the glass products being fired.
The tray is manufactured from 304 Grade Stainless Steel, which is then subjected to a proprietary treatment involving the tray being hand-sanded and then finished by artisans.
The resulting deep and rich texture beautifully completes any outdoor decor theme.
Match Light Kits, or as often referred to as Match Lit Kits, are the easiest type of Fire Pit ignition system to install, operate and maintain. And these Round Drop-In pans are no exception.
Installation is straightforward. Create a cutout in the top surface of your fire pit structure, one inch larger than the given dimensions of the tray. For example, the 19-inch diameter tray requires a 20-inch cutout.
The tray then drops into the cutout, sitting securely on the generous inch and quarter lip or flange. Using the gas connection supplied with the kit, connect the gas line to the base of the fire pit tray and the other end to your gas supply line, or propane gas bottle.
To light your fire pit, turn on the gas via the suppled gas shut off valve and ignite the gas with a taper or match.
You can adjust the flame height via the gas valve. To turn the fire pit off, just shut the gas valve.
The Round Bronze Match Light Kit is available in two sizes and Natural Gas or Propane versions.
Along with the tray, the supplied burner is also manufactured from Stainless Steel, which makes them both extremely durable and long-lasting.
This product qualifies for the Lifetime Warranty.
To complement and protect this unique looking fire pit tray., also produce matching Oil Rubbed Bronze Fire Pit Lids.
These lids straddle over the fire pit tray and keep out the dust, dirt, and water so that your fire pit is always ready for use.
Name
Stainless Steel Propane Fire Pit Burner
Material
Stainless steel
Size
800*800mm
Steel thickness
2mm
Surface
Pre-rusted
Application
Outdoor
Technology
Laser cut,bending,punching,welding,weathering
Weight
3.5KG
Packing
carton
Round Fire Pit Burner Round Fire Pit Burner,Propane Round Burner,Circular Propane Burner,Round Fire Pit Burner Ring
Henan Jinbailai Industrial Co.,Ltd , https://www.hnjblbbq.com