Window screen is usually made of galvanized iron wire, stainless steel wire and aluminum wire. It is widely used as mosquito screen, window screen, door screen and filter screen. The plain wave one is very common. The plain wire cloth is not crimped before weaving, with the same diameter warp and shute Wires woven in a simple over and under pattern.
Features
Ÿ Mesh:
Number of openings per inch in horizontal and vertical directions.
Ÿ Woven
type: Plain weave.
Ÿ Type
of edge: Rough selvedge, wrapped selvedge.
Galvanized Wire Mesh Screen,Aluminum Wire Screen,Stainless Steel Wire Mesh DINGZHOU TIAN YILONG METAL PRODUCTS CO., LTD. , https://www.wiremeshsolution.com
Injection blow molding machine 
Plastic extrusion blow molding machine
IBS Injection Blow Molding Machine
(1) Full-closed-loop control (2) Finished container size: 2ml to 2L
(3) The precision and uniformity of finished products of the bottleneck are high. (4) The hydraulic part of the mold area is located at the bottom of the equipment, which is used for the production of clean oil-free molds and containers without pollution (5) Particularly suitable for the production of GMP workshops. Requirement (6) No more material needed
B&W series extrusion blow molding machine
(1) Full-closed-loop control (2) Finished container size: 10ml to 60L (also includes 5 gallon PC bottles)
(3) Up to 24 cavity, 12 heads, co-extruded layer (2 to 7 layers)
(4) High-precision wall thickness control system can achieve the effect of reducing product weight and increasing product strength. (5) After several million cycles, a lower CPK value can be achieved. (6) High-performance in-mold labeling
At present, the hollow plastic bottles are processed by extrusion blow molding and injection blow molding.