The artificial rock climbing field consists of four parts: steel frame, rock plate, fulcrum, and safety equipment. These four points determine the success of this schist rock field in market competition.

First, shape rock board

The shape of the rock plate is essentially different due to the different processing methods and the quality of the materials used in the molding. The differences are as follows:

Features
Rock material
★ Wooden Rock Climbing Field This type of rock field is cheap and has a rich rock face change. In order to increase the change of the surface of the wood, some prominent giant sculpture blocks can also be installed. The ominous point is that the rock field made of wood board is not waterproof. It is not suitable for being built outdoors. Because it is cheap, it is still built in the open air. However, due to the non-corrosion resistance, the service life is not long, and it is not economic in the long run. The surface treatment of the wood slate field is also the key point to consider. If only the ordinary paint is added to the stone powder, not only the friction is bad, but also the paint on the surface of a few times may fall off.
★Composite material rock climbing board rock board This type of rock board has high strength, waterproof, fire-retardant, high simulation, natural texture, anti-aging, and moderate cost. The basic material is glass fiber made up of multiple resin, the biggest advantage is that it can be freely combined. As a brick, it is assembled into a simple or complexly varied rock field. With its own material properties, surface relief and rough processing, making it a variety of tactile and three-dimensional changes, in many international competitions were selected.
★Silicon-aluminum rock climbing platform rock board This kind of rock board is beautiful in appearance and high in strength. It can be used as a venue for competitions in addition to rock climbing exercises. It can also use electric or hydraulic pressure equipment to quickly adjust the rock board. The angle of inclination can constitute a hanging rock climbing surface, but the cost is high. In the case of a budget permit, it can also be featured to attract more users.
★ Shotcrete Concrete rock climbing site Rock rock This type of rock field is formed by the use of steel plates to form the skeleton structure of the entire rock field, after which it is covered with a stencil that increases the structural strength and finally sprayed. To be confused when the concrete is not hardened, the professional technicians with experience in rock climbing use manual simulation to make a simulation of the surface of the rock, then make sure to fix the point and lock the rock block and you're done.
Unlike oil fields such as wooden or synthetic rock plates, sprayed rock sites can be dismantled at any time and cannot be changed once completed. On the other hand, its design is completely free from the limitations of rock and stone combinations. Modeling can be used freely and freely, making each section of the spray rock field a unique art sculpture in the world.
For the method of rock acceptance test and the test method for the strength of climbing facilities and accessories, refer to the rock climbing related standards in “http://”.

Second, rock wall bracket

The rock wall support is a fixed main structure composed of channel steel or steel pipe connected together. This part is an important part of the rock wall structure. Many investors in the market focus on the quality of the rock plate and neglect the strictness of the steel frame. This is not correct. The slate is an object directly linked to the athlete, and the quality is of course very important, but the steel frame that supports the slate is a crucial factor. Usually, in the case of an outdoor climbing field that does not rely on strong buildings, it is necessary to make a certain depth of the underground foundation according to the height of the rock field to ensure the safety of the entire rock field.

Third, climbing fulcrum

The fulcrum is the object most contacted by a climber during climbing in an artificial rock field, so the quality of the rock has a great influence on the quality of the whole rock field. Is the rock block durable? Will you hurt your hand? Will it be loose? All of them should be noted in advance. Their methods of production are of various shapes, square, round, and angular.

Fourth, safety equipment

After the rock wall is built, it must be equipped with rock climbing equipment to climb. The rock climber should wear a special iron lock to connect with the climbing master rope, hang a non-skid powder bag in the waist, wear climbing shoes, and climb through the protective operation protection.

10 Colors Pen

10 Colors Pen,10 colors multicolor pen,10 colors multicolor ballpoint pen,multicolor pen with 10 colors refill

Tonglu shangmei pen industry co.,ltd , https://www.shangmeipenindustry.com