Men'S Jewelry,Panel Chunky Necklace,Four Cornered Star Necklace,Four Cornered Star Men'S Necklace Huayao Master (Puyang) Automation Equipment Co., Ltd. , https://www.huayaomaster.com
First, the font problem 1 some font library description method is different, the overlapping overlap of the stroke will be out of stack, be careful!
2 Paragraph texts containing special characters in Chinese and English are prone to problems such as "■, @, ★, ○", etc.
3 Use the new standard GBK font to solve the problem of remote word loss.
4 strokes too thin font, it is best not to use more than 3 colors of aliasing, such as (C10 M30Y80) and so on, the same reason, does not apply to dark-colored anti-white characters. Under conditions that cannot be avoided, it is necessary to mark the reversed white character, apply a similar color to the background, or print a single color (usually black K).
Second, the gradient problem 1 The common problem is this: If the red → black gradient, set the wrong: (M100 → K100) will be difficult to see the middle!
The correct setting should be like this: (M100→M100 K100) After careful analysis, you will understand, and other situations will be analogized.
2 transparent gradient, is suitable for network graphics methods, grayscale can also be, but the final draft output can not be, because of its spatial mixing mode is RGB, screen mixing color with printing CMYK too much difference, pay attention.
3 The black part of the gradient should not be too low, such as 5% black, because the output has a black overprint option, less than 10% of the black is usually used instead of overprinting, resulting in problems, the same, the use of pure light black also Be careful.
Third, the picture problem 1 About the psd file, there is a point that you do not do any "destructive operation" after importing it, such as: rotation, mirroring, tilt, etc., due to its transparent mask, the output will produce Broken graph.
2 is still a mask, use it in Coreldraw should be careful, if necessary, it is better to adopt the "placed container" method more insurance.
3 resolution and re-sampling Do not do this in corel, "conversion to bitmap" is indeed convenient, but the loss of color reproduction, to professional point, in the ps to get it.
4 color mode, don't blame me, this is the veteran also has the wrong hand.
All pictures must be cmyk or grayscale and monochrome bitmap, otherwise they cannot be output.
Fourth, the output attachment is also the output of the horns, color labels, etc., and now it seems that the output company services are very good, do not worry too much.
Fifth, prepress inspection using PDF files for prepress inspection! Pay attention not to print a pdf directly using coredraw!
The order is this:
*.cdr → The output is "Encapsulated EPS, which is *.EPS", and then Acrobat Distiller generates EPS *.pdf.
The PDF files thus produced can be directly printed by some printing manufacturers, and the documents are relatively small, and can be transmitted by E-mail. It is very convenient.
If you have a mistake in your file, you can see it at a glance in the PDF preview! (Note: Distiller4's version does not fully reflect some of the hemming effects and needs attention.)
Editor's note: CorelDraw is a vector drawing software with powerful design and printing functions. However, when CorelDraw prints out, it will always encounter different problems. Now let's analyze together: