The installation of the bedroom wall lamp should pay attention to its height, not too close or far. So choose a good location when installing the wall light to avoid unnecessary problems. Wall light installation need to find a professional chef installation, we asked the following small series to find out more bedroom room wall lamp installation method and installation location bar. Bedroom wall lamp installation method First, the bedroom wall lamp installation method The first thing to determine is the height. The installation height of the wall lamp is generally slightly higher than the eye level, about 1.8 meters. The height of the bedroom wall lamp is generally 1440~1850mm from the working face, and 2240～2650mm from the ground. However, the wall lamp of the bedroom can be closer to the ground, about 1400mm ~ 1700mm. The distance from the wall lamp to the wall is closer, generally between 95mm and 400mm. Then determine which wall light is installed and then determine where to install it so that you can begin the installation. Steps, according to the hole on the hanging plate of the wall lamp, mark the position where the expansion screw is needed on the wall. In the second step, drill the hole on the wall with the electric drill. Pay attention to the wiring layout, do not drill the wire, and pay attention to the depth of the drilled hole. In the third step, after drilling the hole, you can start the expansion screw. First, insert the expansion screw into the hole that has been drilled, and then use a hammer or other thing to push the expansion screw into the wall until it is completely inside the wall. In the fourth step, the wall lamp of the bedroom passes through the hole of the wall hanging plate and then is fixedly screwed on the expansion screw. It should be noted that the fixing on both sides should be alternated, so as to avoid the deviation of the wood screw. In the fifth step, connect the hanging plate and the ceiling plate with screws, and then screw the top screw to fix the ceiling plate. Disconnect the power from the room, then connect the wires of the wall lamp to the power cord, and install the wall lamp. Bedroom wall light installation Second, the bedroom wall lamp installation location Distance: As the name suggests, the bedside wall lamp refers to the lighting fixture installed at the bedside. Where is the installation position of the bedroom wall lamp? Before the bedside wall lamp is installed, first determine the distance between the wall lamp and the ground wall. If the bedside wall lamp installation position is too high, the bedroom wall lamp has a certain influence on the illumination, and the light will be scattered, which is not conducive to collecting light. If the bedside wall lamp installation position is too low, it will easily hit the head. The height of the bed surface should also be taken into account during the installation process. Usually, the height of the bedside wall lamp installation position is 1.5-1.7 meters from the ground and the distance from the wall surface is 9.5. -49 cm between. Xiaobian reminder Determine the height of the wall light from the ground and the distance from the wall. If the bedside wall lamp installation position is too high, the bedroom wall lamp has a certain influence on the illumination, and the light will be scattered, which is not conducive to collecting light. Therefore, when installing the bedroom wall lamp, pay attention, do not blindly install. The above is the installation method and installation location of the bedroom wall lamp shared by you in the small net. I hope to help you. If you want to know more about the bedroom wall light, please continue to pay attention to the net. Get a quote for 10 seconds and get four sets of design solutions for free. You can also follow the whole process of decorating the housekeeper and take action! 1. Temperature difference, strong and durable Henan WonkingChina I/E Co., Ltd. , https://www.wshousewares.com
The new version of the Ceramic pot, the material is fine, usually made of some kind of ceramic material is not afraid of hot and cold temperature difference. Some glass ceramic pot physical properties can reach 500℃ heat temperature difference, and do not deformation, cracking or broken, will not lose glaze and luster. Glass ceramic pot inner wall and appearance is more smooth, no odor residue, but also rejected the traditional casserole and clay pot easy to adhere to stains and burn black shortcomings.
2. Strong heat collection function, nutrition and energy saving
Ceramic tank selection of ultra-heat resistant material, heat storage, good insulation, can maintain high thermal state with minimum firepower. Therefore, the food in the soup pot is easy to cook. And because the cooking time is relatively short, energy saving is more environmentally friendly. In particular, the appearance of the transparent glass ceramic pot makes it easier for housewives to observe the temperature of cooking ingredients, so that it can be adjusted at any time, thus effectively reducing the loss of nutrients caused by cooking food for too long.
3. Not easy to age, often new
Ceramic POTS do not readily absorb food odors and stains. From cooking to serving, the non-absorbent material prevents the pot from aging easily and from cracking due to temperature differences like a casserole.