[ Chinese wardrobe net ] In the home decoration, many friends will choose to install the wardrobe sliding door track by themselves, which not only saves the decoration expenses, but also can realize the fun of their own hands. In order to help friends do this work better. Below, Xiaobian will introduce you to the installation method of the wardrobe sliding door track in detail, and friends who are interested can come and find out!

Cabinet sliding door track

Cabinet sliding door track - upper track installation

When installing the wardrobe sliding door on the track, in the case of installing the wardrobe, the sliding door should be laid flat, and the track should be placed at the bottom of the sliding door at the middle of the door cover at the bottom of the sliding door. The next step is to confirm the middle position. Use the tape measure to mark with the marker in the middle; then use the upper track to draw the hole that needs to be fixed by screws and then drill, fix the two sides first, then fix the middle part, that is, complete the installation of the upper track.

Cabinet sliding door track - lower track installation

No matter whether it is a new wardrobe or an old wardrobe, there will be a lot of dust during installation. Before installing the lower rail, wipe the door frame with a rag. The position of the lower rail is the same as that of the appeal. The sliding door is placed in the upper and lower rails to adjust the position. To make the sliding door achieve the best sliding effect; then fix the position of the lower rail, clean the inner layer of the track with a brush, and finally tighten all the joints with a screwdriver.

Cabinet sliding door track - sliding door installation

The key point of this step is that the upper pulley is between the rails, the sliding door is roughly fit at the door frame of the wardrobe, and then the sliding door is slowly lifted to put the pulley into the upper rail, and then one hand is forced to lift the sliding door, and the other is The hand pulls the lower pulley so that the lower pulley smoothly enters the lower track. The sliding door is installed, and the sliding door is protected. Finally, the anti-collision strip is attached at the sliding door to prevent the child from bumping. The installation method of the sliding door sliding door of the wardrobe is the three big steps, but it is relatively difficult to put the pulley. It is better to have two people to cooperate with each other to make it easier.

The above is the installation method of the wardrobe sliding door track introduced by Xiaobian, I hope to help the friends who have the needs. From the above introduction, we can see that the installation of the wardrobe sliding door track is not very difficult, and consumers with hands-on ability should be able to complete it smoothly. Here Xiaobian wants to remind consumers that when choosing the wardrobe sliding door track, we must pay attention to the quality of the product and ensure the use of the wardrobe.

Oxygen Facial Machine

Oxygen Facial Machine,Oxygen Facial Device,Oxygen Facial Equipment,Oxygen Beauty Machine

Guangzhou Lesen Xinpin Electronics Co.,Ltd , https://www.lesenxinpin.com