In addition, it is also very important to ensure that the ink supply pipe is completely sealed (from the ink cartridge to the ink bag), any leakage may cause the ink supply to fail, or even cause ink rejection, so it is necessary to constantly check whether the pipeline is sealed. Stopping use during the period may even cause the ink to dry up, resulting in clogging of the ink jet head.
Second, the temperature, humidity We require the room temperature control at 20 °C ~ 25 °C, the temperature can not be too high or too low, the South Chaozhou area should consider dehumidification.
Third, the current ink formulation has been very stable, no need to filter the current user always before the ink is used to filter it again, but often because the user's filter tools and filter environment can not meet the requirements, but to the ink caused some pollution, causing Plug phenomenon.
Fourth, daily cleaning and maintenance Daily cleaning is very important for the maintenance of the machine, general daily cleaning and maintenance procedures are as follows:
(a) Clean the blade with a sponge every two to three days and check if the wiper track is normal.
(b) Clean the ink bag every two weeks and observe whether there are impurities in the ink bag. Otherwise, replace it. It is best to have a spare ink bag, remove the ink bag and infuse it with alcohol.
(C) Clean the motor pump and ink pad every 20 days or so. Remove the entire ink pad and place it in the ultrasonic cleaner. Clean it for more than half an hour.
(D) The party that receives the ink bag ink cartridge with a syringe every month. Then the alcohol is drawn and filtered through the ink bag before entering the spray head. This alcohol is no problem. When cleaning the nozzle, clean the nozzle with alcohol, while spraying the nozzle, wipe the surface of the bottom of the nozzle with your finger, because the waste ink and ink of the nozzle often gather around the nozzle, and the machine can not be used to clean the nozzle. The surface is completely clean. This is also very important.
(e) insist on printing some small jobs every day. It is best to print one A4 size picture each morning and evening to keep the ink out of the nozzle. Because the ink is a kind of quick-drying ink, Mimaki often pays attention to adjust the position of the nozzle. Mutoh often performs Home action to ensure that the nozzle and ink pad are normal. Anastomosis.
If you have any questions, please call Guangzhou Feiyang United Digital Printing Center.
First, the quality of ink on the ink road directly affects the machine's ink supply system. It is recommended to use a special ink tube (sold by Feiyang Company). It not only can prevent corrosion, but also has a particularly good connection tube seal. In addition, in the modification of the ink, we must pay attention to: the shorter the distance between the ink tube and the nozzle, the better, and minimize pipe turning, because oily ink flow is poor, too many bends will affect the normal flow of ink, affect the normal supply ink.