Introduction The glass vacuum reactor is a double-layer glass design. The reaction medium can be added to the inner layer for stirring reaction. The interlayer can be connected to different cold and heat sources (frozen liquid, hot water or hot oil) for circulating heating or cooling reaction. Under the constant temperature setting, in a closed glass reactor, stirring reaction can be carried out under normal pressure or negative pressure according to the requirements of use, and it can be used for reflux and distillation of the reaction solution. Ideal pilot plant and production equipment for new material synthesis. Features 1. There is a baffle inside, so that the sample can be fully stirred. (First in China) 2. Frequency control and AC induction motor. Constant speed, no brushes, no sparks, safe and stable, can work continuously. 3. A full set of glass instruments are produced with GG17 high borosilicate glass, which has good chemical and physical properties. 4. Hot oil is circulated through the interface of the glass interlayer, which can be used for heating reaction, and cold liquid can be used for low temperature reaction. 5. It can react at normal temperature, and can quickly take away the reflected heat by running tap water. 6. The lower discharge port has a flange port and a PTFE valve. There is no dead angle in the container, and it can be disassembled to facilitate the discharge of solid materials. 7. The five-port reactor cover, the extra large port design is easy to clean, and the standard port socket can choose to assemble the reflux and distillation synthesis device. maintenance 1. Check the instrument carefully before use, whether the glass bottle is damaged, and whether the interfaces are consistent, pay attention to take it lightly. 2. Wipe each interface with a soft cloth (can be replaced with a napkin), then apply a little vacuum grease. (Be sure to cover the vacuum grease after use to prevent the ingress of lime sand.) 3. The interfaces of the glass reaction kettle should not be tightened too tightly. Regular loosening should be done to prevent the connector from locking for a long time. 4. First turn on the power switch, and then let the machine run from slow to fast. When the machine is stopped, the machine should be in a stopped state before turning off the switch. 5. The PTFE switches everywhere can't be tightened excessively, which is easy to damage the glass. 6. Every time you use it, you must use a soft cloth to wipe off all the oil marks, stains and solvents left on the surface of the machine, and keep it clean. 7. Loosen the PTFE switches after shutdown, and the PTFE piston will be deformed when it is still in working condition for a long time. 8. Regularly clean the sealing ring by removing the sealing ring, checking whether there is dirt on the shaft, wiping it with a soft cloth, then applying a little vacuum grease, and reinstalling it to keep the shaft and the sealing ring smooth. 9. The electrical part must not enter the water, and it is strictly forbidden to get wet. 10. It is necessary to purchase the original genuine parts of the original factory, and the use of other parts at will will cause fatal damage to the machine. 11. When doing any repair or inspection on the glass reactor, be sure to cut off the power and water For more inquiries about glass reactors, please log in to our booth for inquiries: http: //
Stainless
Steel Shaker
1: Stainless Steel Cocktail Shaker ,prefect for mixing,
straining and serving cocktails and beverages in style.
2: Made from stainless steel; resists rust; won't absorb
odors or transfer flavors between uses.
3: Easy to use and clean, high-polished mirror finish for a
stunning appearance. Also suitable for home .
4:Combine the Measuring
Jigger, Waiters Corkscrew, Stainless Steel Can Opener, Cocktail
Strainer, Mixing Spoon as one set , Bartender's favorite set.
5:Different size to choose,200ml/300ml/500ml/700ml/1500ml .
FAQ:
1:How can
I get the sa
We can
provide the sample for customers to check the quality.
Please
kindly provide the delivery info for calculate the sample cost. If you have DHL
/TNT/UPS/FEDEX account, please also kindly provide it to us.
You can
do the payment of sample via T/T and PayPal.
2:How
about the sample time?
Usually
the sample time is 7~10 days after have the sample cost.
3:How
long will it take for mass production?
Usually
45~60 days after have the deposit.
4:Can we
have our logo or company name to be printed on your products or the package?
Welcome
OEM.
5:what
certificate can you provide?
CE,CB,GS,FDA,LFGB,ROHS
are available here.
6:How can
we get your monthly new products announcement?
Please
join our mailing lists.
Cocktail Shaker,Stainless Steel Powder Shaker,Shaker With Fine-Mesh Lid ,Stainless Steel Shaker With Handle Jiangmen Wellway Houseware Co.,Ltd , https://www.wellwayhouseware.com
mple?