Manual solder printer
WITHOUT STENCIL FRAME MATCHED ~
Simple manual stencil printer machine is small and convenient, especially for new product trial,and some low-volume electronics factory, the production of many varieties, affordable, easy to use,is essential for the production of small electronic tools.
Feature:
1.can be flat surface printing. manual operation,easy to adjust, accurate and reliable
2.simple manual stencil printer machine can be used in several specifications, suitable for all sizes of hand-printed silk screen.
Four sizes for your choosing:
Model
working bench(mm)
Packing size(cm)
G.W.(kg)
Small
300x240
59x14x45
12
Medium
320x440
71x14x52
13
Large
600x420
91x13x64
16
Larger
700x500
92x14x71
22
1.Install screw lever, wire clip, fixed block and counterweight lever in sequence according to the graphic presentation 
2.rotate counterweight lever while adjusting tight nut.
Operation instruction:
1.put steel stencil in the wire clip, and tighten the steel stencil by its handwheel
2.put the simple DIY positioner on the printing table and also put the PCB accordingly.Adjust the handle on the operation platform to make the holes on PCB match the holes on the steel stencil.
If you need high precision model, here recommend you PM3040 for reference , could get it's info by browsing our showroom , or send us inquiry directly.
We supply customer one-stop  purchase of whole prodution line:
printer + pick and place machine+ reflow oven.
More info welcome to contact us .