Body Trimmer,Body Hair Trimmer,Body Trimmer For Men,Mens Body Hair Trimmer Body Trimmer,Body Hair Trimmer,Body Trimmer For Men,Mens Body Hair Trimmer Ningbo Unibono Appliance Co.,Ltd , https://www.unibono.com
Shanghai Haozhuang Instrument Co., Ltd. developed the LNB brand light incubator, which is energy-saving and environmentally friendly, leading the country.
Features: It has over-temperature and abnormal sensor protection functions to ensure the safety of instruments and samples; the optional full-spectrum plant growth lamp is conducive to plant growth and improves disease resistance. With power-off memory, power-off time automatic compensation function; constant temperature control system, fast response, high temperature control accuracy.
Uses: microcomputer automatic control, touch switch, easy to operate; programmable multi-section control mode, temperature, humidity, light intensity and time can be set independently during day and night. Air duct ventilation, soft wind speed in the studio, uniform temperature; hollow reflective tempered film glass, good thermal insulation performance and beautiful appearance. Fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc.
Instructions for use 1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator in the switch is on.
2. Please refer to the manual of intelligent digital temperature controller for temperature control setting.
3. If lighting is needed, turn on the lighting switch.
4. This type of incubator has a breakpoint protection function and a delay function of about one and a half minutes. After the compressor stops, it will start again for about one and a half minutes.
Maintenance and care 1. The enclosure of the incubator should be reliably grounded.
2. The incubator should be placed in a cool, dry, well-ventilated place away from heat sources and sunlight. Place it steadily to prevent vibration and noise.
3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm. There should be a gap of 50mm on the side of the box and at least 300mm of space on the top of the box.
4. When carrying, repairing and maintaining the incubator, avoid collision, shaking and vibration; the maximum inclination is less than 45 degrees.
5. The instrument does not work suddenly, please check whether the fuse tube (behind the box) is burnt out, and check the power supply.
6. When cooling the incubator, it is not advisable to make the difference between the temperature inside the box and the ambient temperature greater than 25 degrees.
Shanghai Haozhuang Shanghai Haozhuang Instrument Co., Ltd. has developed the Hao Zhuang (LNB) brand light incubator, which is energy-saving and environmentally friendly, leading the country.
Features: It has over-temperature and abnormal sensor protection functions to ensure the safety of instruments and samples; the optional full-spectrum plant growth lamp is conducive to plant growth and improves disease resistance. With power-off memory, power-off time automatic compensation function; constant temperature control system, fast response, high temperature control accuracy.
Uses: microcomputer automatic control, touch switch, easy to operate; programmable multi-section control mode, temperature, humidity, light intensity and time can be set independently during day and night. Air duct ventilation, soft wind speed in the studio, uniform temperature; hollow reflective tempered film glass, good thermal insulation performance and beautiful appearance. Fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc.
Instructions for use 1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator in the switch is on.
2. Please refer to the manual of intelligent digital temperature controller for temperature control setting.
3. If lighting is needed, turn on the lighting switch.
4. This type of incubator has a breakpoint protection function and a delay function of about one and a half minutes. After the compressor stops, it will start again for about one and a half minutes.
Maintenance and care 1. The enclosure of the incubator should be reliably grounded.
2. The incubator should be placed in a cool, dry, well-ventilated place away from heat sources and sunlight. Place it steadily to prevent vibration and noise.
3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm. There should be a gap of 50mm on the side of the box and at least 300mm of space on the top of the box.
4. When carrying, repairing and maintaining the incubator, avoid collision, shaking and vibration; the maximum inclination is less than 45 degrees.
5. The instrument does not work suddenly, please check whether the fuse tube (behind the box) is burnt out, and check the power supply.
6. When cooling the incubator, it is not advisable to make the difference between the temperature inside the box and the ambient temperature greater than 25 degrees.
With a deep understanding and mastery of scientific instrument technology, Shanghai Haozhuang has not only developed low-temperature and constant temperature instruments, ultrasonic instruments, cabinet instruments, microbiological instruments, ice-making refrigeration instruments, and laboratories based on independent research and development of core technologies of scientific instruments With supporting instruments, and gradually formed a product pattern of various scientific instruments and technical reserve products to develop together. Welcome customers!