Whether it is a CTP system or a film-based workflow, the quality of printed spots is the most critical. Here are some of the printing plates developed by manufacturers that contain the latest technology.

Presstek's Anthem Plate: The surface of the wet offset hot plate is processed into particles and anodized. It is compatible with various types of fountain solutions and inks. Print durability is 100,000 printed sheets, no preheating equipment is required, no developer and post-development baking box are required.

Agfa's Mistral plate: a dry, non-developing plate that can obtain the best quality and highest print durability. It is based on advanced thermal ablation technology, allowing the printing plate to complete the imaging and preparation process within a few minutes (without chemical development), Mistral's screen lines can reach more than 300lpi.

Thermolite version: used for short version, imaging on the press or offline. Agfa uses traditional aluminum-based technology, coated with a layer of heat-sensitive materials. Thermolite is imaged by thermal exposure of the emulsion layer and can be imaged on a printing press. Its wetting characteristics are exactly the same as traditional printing plates; the non-porous coating on the aluminum substrate is a hydrophilic coating.

Lithostar Ultra: A positive type aluminum plate, which can be used in combination with various visible light imaging technologies. There are three models: Lithostar Ultra LAP-V (violet light sensitive / 410nm), Lithostar Ultra LAP-O (positive color light sensitive / 488 nm and 532 nm), and Lithostar Ultra LAP-R (red light sensitive / 650 to 670nm). It can be used on Agfa's latest purple lasers Agfa Galileo VS and Galileo VXT.

Agfa N91: negative type aluminum plate, can be used for visible light (488 nm and 532 nm) plate-making system, including Agfa's Polaris series. It can be used for long version work. In the case of 175lpi, the copied dot range is 2% -98%, and the printing resistance rate reaches 300,000 printed sheets without baking.

LiteSpeed: rewritable spray imaging type printing plate is under development. Based on Thermolite technology, it is a chemical coating applied to a metal substrate (plate) on a printing machine, imaged, printed, removed, and then re-sprayed the rabbit to wait for the next imaging.

Thermostar: Agfa's non-baked products can reach 500,000 printed sheets, eliminating the need for pre-baking and other steps. Kodak Polychrome Graphics.

Development-free printing plate: This is a thermal, negative printing plate that can be exposed and imaged on an external or built-in hot drum under digital drive, with a residue removal / filtering system on the imaging drum. This printing plate has a print durability of 50,000, adapting to a variety of water-ink balances, without preheating, developing, gluing or baking.

CTPI: Used Thermal Printing version / 830, Compact Thermal Processing System (CTPI) is an all-in-one device and chemical system, including preheating module, hot plate developer and optional post-baking resin coating unit (fast Baking unit).

Aries Excel: Positive and negative printing plates for medium and long versions, 150, 000 (no baking), 600,000 (baking).

Thermal Waterless Plate: Bringing thermal imaging to waterless offset printing technology, the printing plate has a durability of 200,000.

UP3: positive image printing plate, used with UV and metal inks and UV varnish, compatible with fine traditional and random screens.

DirectPrint: negative type printing plate, no pre-press development processing is required, and can be imaged on the printing machine without chemical components and developer.

PDI PDI is also a manufacturer that produces hot plates. Prisma thermal imaging plates can be exposed under a 830nm laser (Creo-Scitex) without pre-baking and post-baking treatments, and can be completed with very little water Printing, greatly reducing the preparation time before printing and the wear on the cylinder.

Fujifilm Fujifilm's digital printing plate Brillia production line is also based on aluminum, which is the same as the traditional PS plate production line.

Brillia LP-NS: negative pattern, high-speed photosensitive polyester version, when the screen line number is 200lpi, it can replicate 2% -98% of the dots, using argon ion (488nm) or FD-YAG (532nm) light source, Can be used with various types of chemicals.

Brillia LH-PI: It is used for the hot version of the positive version of the middle version. When the number of screen lines is 200lpi, it can copy 1% -99% of the dots. exposure.

Brillia LH-NI: IR laser-sensitive negative pattern, suitable for long live hot version, when the screen line number is 200lpi, it can copy 1% -99% of the dots, no pre- and post-baking, use 830 nm IR laser for exposure. Recently Fujifilm has made some improvements to the printing plate.

Mitsubishi Imaging SDP-Eco 1630: used for black and white and spot color CTP applications on small printing presses. It uses high-speed winch technology and can output 78 printing plates with a resolution of 1200dpi per hour, which is three-thirds less than in analog systems. Two of the developing chemicals, it contains a separate developer, and two new developing solutions are specially used to process the company's Silver DigiPlate or polyester plates.

DPX plate-making system: Developed by Purup-Eskofot, it features a built-in cylinder and a four-color printing plate with a width of 18.1 × 21.6 inches.

MEGAPro polyester version supporting ABDick and Digital PlateMaster (DPM) direct plate making equipment production line.

DPM2340: A narrow-width, inner-drum system featuring 3600 dpi and 45 plates per hour.

DPM2000cp: built-in scanner with integrated fast version: scan the hard copy to a direct plate-making device, not Photoshop.

Pet Scissors Set

Barber Scissors Set,Pet Scissors Set,Small Pet Scissors,Fishbone Teeth Pet Scissors

Zhangjiagang Mister Tools Co., Ltd , https://www.mingshiscissors.com