China Baolian Paper Committee visited Europe for three consecutive years to inspect and in-depth understand the level of European advanced paper packaging industry equipment, the development status and development direction of carton carton manufacturing, promote the close cooperation between China and Europe paper packaging industry, open-minded learning, complement each other , Absorb experience, identify problems, identify gaps, and clarify the direction of development, so that China's paper packaging industry can keep up with the latest trends in the world, to a high degree of automation, modernization, environmental protection, energy saving, increase production capacity, with reference to the high level of European standards , high standards, high-quality direction of development, promote the upgrading of China's paper packaging industry, and put on China's manufacturing high-quality outerwear, so that high-quality Chinese products sell well around the world.

On June 1st, after a long-distance flight of nearly 13 hours, China’s Baolian Paper Committee visited 14 delegations in Europe. Under the leadership of Secretary General Liu Shousheng, it successfully arrived at 6:30 local time. Frankfurt Airport, Germany, and sent to the hotel by bus. The local climate is pleasant, the air is fresh, the grass is everywhere, the trees are green, and the evening breeze blows in. It is intoxicating.

On the 2nd of June, the rising sun rises and the sky is clear. The city is full of sunshine as the sun shines. During World War II, Frankfurt was destroyed by war. Frankfurt is now one of the few modern metropolises in Europe. It has a high number of skyscrapers and is Germany's financial and trade center and Europe's cargo center. Due to the holiday on Sunday, there were few pedestrians on the street and there was a red light when crossing the road. Even if there was no car passing by, the Germans would wait until the green light flashed before crossing the street. The open-air beer bar on the street abounds and becomes a beautiful scene in the city. In the Paul's church in the city center, people are thriving, and many Christians in the group are earnestly praying to pour out their feelings to God. Tourists from China travel endlessly through the streets of the city. The old Opera House, the Rolle Square, which is famous for its unique herringbone architecture, and the rivers of the Main U.S. have all been left and right. Experience the city of Frankfurt. Infinite charm.

In the afternoon of June 2nd, follow the River Main and drive to the famous town of Rodessham. Outside the city, there are rolling hills, rich vines, wheat and other crops growing on the fertile black soil. The vigorous greenery spreads wildly. Wherever you go, there are trees and grass everywhere, and there is almost no wasteland and green. To say green, Germany is a model of the world. As a result of heavy rains in the previous few days, the river in the United States has soared and many roads have been flooded, delaying the speed of advancement. Nearly two hours later, the delegation visited the town of Rodischberg, with its unique scenery on the banks of the River Main. As the European motorcycle fans will be held in the town, this has become the World Motorcycle Expo. The roaring sound of motorcycles makes this quiet town bustling and unforgettable. The thrushes and alleys give people a glimpse of another unique view of Germany’s secluded and ancient town. Throughout the alleys of gifts, bars, visitors leisurely drinking beer, savoring a simple lunch, basking in the sun and enjoy life.

Around 5:00 pm, driving for more than one hour, the delegation came to the well-preserved ancient city of Heidelberg. Heidelberg, the oldest city in Germany, stands on both sides of the Main river. It is the oldest Heidelberg University in Germany, and its majestic ancient castle, especially because of its world-famous Heidelberg offset press. Walking through the narrow streets, strolling on the old bridge with nearly 200 years of history, looking at the ancient and unique buildings on both sides of the strait, green mountains, beautiful scenery, especially the rising water level, the endless flow of the United States In the river, one day's fatigue faded away. The Mein River, rolling eastward, was full of energy and energy.

On the morning of June 3, we arrived in Stuttgart, Germany's important industrial city, which is also the headquarters of the world-famous Mercedes-Benz Auto Kingdom. The delegation visited the Mercedes-Benz headquarters exhibition hall directly. The exhibition hall is full of imposing power. The signs on the roof of the building are like the crown of the automobile kingdom. They constantly rotate and shine. From the first to the third floor exhibition halls, various kinds of Mercedes-Benz cars with different specifications and novel styles are on display to ignite the exhibition hall, demonstrating the crystallization and wisdom of German automobile manufacturing, and also representing the highest level of high-end automobiles in all countries in the world today. It's amazing. The Mercedes-Benz sedan is not only seen everywhere in Germany, but also in the world, including China's high-end car market is also dominate the world, becoming the company's top executives, presidents and national leaders of choice. Afterwards, the delegation visited the Baden, a famous resort town in Germany. Baden is famous for its spa treatments. The small town of Baden, with a population of over 3,000, is located in the Valley of the Oss River. Although tourists are rare, they also meet fellow Shanghai residents. The city stretches along the valleys, backs against the green hills, faces the towering trees, and sets foot on the banks of the green mountains and streams on the banks of the mountains. It walks on the Leopoldo Square and passes through the quiet and bustling streets, breathing fresh mountain air. It's refreshing.

In the afternoon we crossed the Rhine and passed through the French city of Strasbourg, which borders Germany and France. The city is known for its French romance and rigorous life of the Germans, as well as the harmonious blend of French and German architectural styles. The Gothic architecture of the Cathedral of Our Lady Square has become an important symbol of the city, symbolizing the city's history and history. As the United Nations Human Rights Organization is headquartered in the city, it also adds to the city's popularity.

On the morning of June 4th, the delegation, accompanied by the manager Mr. Li Zhining of Shanghai branch of MOSCA, set out from Heidelberg and drove to visit the headquarters of Molex Packaging Technology (Shanghai) Co., Ltd. in Germany. Cars travel through rolling hills and steep hills. The fertile hillsides are full of towering pine trees. Large grasslands cover the mountains and plains. They pass over the hills and rise to the top of the hill. They form a potential and smear the earth with green color, which is a lush green. Endless. After more than an hour of green viewing in the car, we arrived at the strangely located MOSCO company at the top of the hill. It was really a wonderful view here. The delegation was personally received by the company’s president, Mr. TIMOMOSCA. Mr. Oliver, the company’s European sales manager, introduced the company's profile.

Founded in 1966, MOSCA Germany has a history of nearly 50 years. There are more than 500 employees in the headquarters in Germany and 300 employees in other parts of the world. The various baling equipments produced are sold in 65 countries around the world. Currently, MOSCA produces 3,000 bales each year. machine. Of these, 70% are exported to all parts of the world. There are 13 branches and sales service centers around the world, providing sales and after-sales services for more than 60 countries and regions. Shanghai Branch was established in 2011. In 2011, total global sales reached 117 million euros, making it one of the world's largest and most technologically advanced baler manufacturers.

MOSCA not only produces balers, but also bales. There is a 8000m2 packing belt factory near the German headquarters. It is currently the only packing belt factory that uses solar power to supply power. In addition, MOSCA also invested in the construction of strapping plants in the United States and Malaysia, providing various types of strapping belts outside Europe. Subsequently, Mr. Oliver and Mr. Li Zhining accompanied the manager to the workshop to inspect the production and assembly processes of various balers. The company covers an area of ​​more than 30,000 m2 and is divided into six workshops, offices and R&D centers.

The first and second workshops are assembled to produce a wide variety of industrial balers, involving newspapers, bank notes, food and beverages, and other fields. The assembly workshop is organized and organized. The computer distribution system provides all kinds of accessories for assembly workers in a timely manner. The ordinary standard parts are outsourced. The core parts such as automatic electrical appliances, ultrasonic welding, and photoelectric systems are all processed in the third and fourth processing workshops. . In order to ensure the quality of the packaged equipment, each component has a bar code label to be archived in different categories so that it can be accurately called from the parts store. Each factory baler has a numbered record, which allows it to grasp and understand the use of each device sold around the world in a timely manner to facilitate the provision of after-sales services. More than 100,000 balers have been available since then. The fifth and sixth workshops specialize in processing and manufacturing corrugated carton packers. The fifth workshop is a zero-parts processing workshop. The workshop is equipped with a variety of first-class precision processing equipment, a laser cutting machine worth 1.5 million euros, various types of processing equipment such as crimping and folding, and automatic spraying equipment. The high standard and high quality of materials used in the assembly shop provide a steady stream of high-quality accessories. The sixth workshop is a multi-purpose assembly workshop, which is equipped with a variety of automatic packaging equipment for automatic carton connection. The main models are RO-TRC-5, UARI-2xt, MCB-2xt, etc.; Models KCA-121, KPT-131, KCK- 131-26 is a high-speed carton and paperboard tray packer. The top and bottom can be equipped with protection devices such as paper protection corners, and more than 100 such devices can be produced each year.

UATR1-2xt is a high-speed carton packing machine, which is equipped with high-speed linkage line equipment such as Enba and Ma Tin. It is packed and packaged in six directions from front, back, up, left, right, left, right, up and down, and has information storage function. It accepts storage of more than 200 size information and can be played at the highest per minute. 32 packages.

MCB-2xt, simple, cheap, efficient, docking with carton printing linkage line, playing 1 or 2 bags, can be arbitrarily selected, the packaging position can be freely set, the operation is prompted by a simple graphic, the unique design of the package With automatic docking device, it can save the time to replace the strap. The device can play 27 bags per minute.

The KCA-121, used in the packaging industry for the pallet industry, is equipped with a rear packaging system and is the world's highest speed baler capable of handling 200 pallets per hour. After a careful and careful observation and an interactive exchange with Mr. Oliver, the delegation visited the workshops and demonstrations of these excellent balers to see the materials, processing procedures and quality inspections of the parts of the processing plant. Each packer must carry out 5,000 package inspections before it leaves the factory and it can be issued to the user only after passing the inspection.

You get what you pay for. Chairman Ding Long Ding Genlong of Shanghai, Chairman Zhuzhou Sanxin Liu Weicheng, Chairman of Shanghai Geer Tang Shuwei, and Du Jianchun, Chief Engineer of Changzhou Haili, all agreed that only by visiting in person can the real value of the MOSA baler be understood. It is relatively high because quality is guaranteed and genuine.

The general manager of Yan Li, Sichuan Kangli Packing Co., Ltd. used 2 sets of MOSCA balers 10 years ago. After field visits and inspections, she had more confidence in using MOSCA's latest balers, and new purchase plans were already in the pipeline.

After the nearly two-hour visit, Mr. Oliver, the Mohs company, personally led everyone to a lunch in a Chinese restaurant in a nearby town. In this remote town, there were even such authentic Chinese restaurants, and it was mainly for local Germans to provide delicious Chinese cuisine that surprised everyone.

On the morning of June 5th, accompanied by Wu Wenjin, sales manager of BHS Shanghai, the delegation visited the German headquarters of BHS for more than an hour. The headquarters is located next to the small town of Weiherhammer near Nuremberg in Germany. On the bank of the beautiful BHS lake, the unique circular reception hall on the lake is supported by a large umbrella that can be automatically lifted up and down. It gives a deep impression on everyone and makes a lot of pictures.

Mr. Dai Wei, Sales Manager of BHS Asia, warmly welcomed everyone and gave a detailed introduction. BHS was founded in 1713. B is the first German letter in the local Bavarian country. H is the first letter of Devin Ironmaking. S is the first letter of Devin salt and BHS represents the company. There is history of development from ironmaking to salt refining. From the acquisition of the government in 1993 to 2011, BHS became a global multinational company, becoming synonymous with the global high-end tile line, manufacturing and sales of 295 tile lines throughout the world. In 2011, the annual production value of BHS was more than 300 million euros. According to the production capacity, 50% of the world's carton packaging was produced using BHS tile. No doubt, BHS is the giant in the world of tile production equipment. .

At present, BHS has 3 production lines of tile lines in the world, Germany, Shanghai, China and Czechoslovakia. Production of single-sided machines, double-sided machines, stackers, glue spreaders, gluing machines, paper holders, preheaters, corrugating rolls and other products are available in the global market. The existing 22 service outlets spread all over the world. Most of them use local technical staff to provide technical support, solve various problems, and provide after-sales services. Another 15 sales companies are responsible for the sales of tile lines around the world.

BHS produces five corrugated board production line series: 1. Constant Speed ​​Star, monthly output of 7 million m2, 180m/min, 2.2m width; 2. Excellent Star, monthly production capacity of 10 to 12 million m2, 250m/min or 300m /min,2.5m width; 3.Classicline, monthly production of 15 million m2, 300m/min, 2.5m or 2.8m width; 4.Volumeline, monthly output of 20 million m2, 400m/min, 2.5m or 2.8m The design speed of Volumeline's new 2.5m or 2.8m door volume is up to 450m/min; 5.Widthline, 25Mm2 monthly production, 350m/min, 3.3m door width, for Europe. (Note: The above capacity is not the maximum capacity, but the equipment can reach the capacity, and the maximum capacity exceeds these data.)

BHS provides a full range of services and training services: accessories, upgrades, 24-hour service hotline, equipment maintenance and training.

BHS also provides corrugating roller business: 1. R&D and manufacturing; 2. Tungsten carbide corrugating roller can be supplied for FRP, Agnati and Taiwan tile production lines; 3. Providing corrugating roller leasing business in Europe.

BHS is a model for implementing global development strategies and expanding the global market. BHS firmly grasps the development trend of corrugated cartons. The global layout has mastered the pinnacle of R&D, production and manufacturing of tile lines, together with sales, service, and maintenance networks throughout the world, the market share has reached 50% of the world, and Still rising. On May 22, 2003, BHS Shanghai Branch was established and became a top priority in global development. From 2003 to 2004, the production workshop covers an area of ​​4,680 m2. The second phase of the project covers from December 2005 to May 2010. The production workshop covers an area of ​​11,700 m2 and has now reached 50,000 m2 production workshop. The final workshop area will reach 80,000 m2. In 2012, the turnover reached 357 million yuan and there were more than 300 employees. In 2012, Shanghai became the center of BHS Asia. Shanghai's business, service and training have been paralleled with BHS's European headquarters.

At noon, the president of BHS hosted a luncheon to entertain all the staff of the inspection team and communicated with the users of the carton factory.

In the afternoon, the delegation visited the BHS production workshop under the leadership of Mr. Dai Wei and Mr. Wu Wenjin.

We enthusiastically visited the newly completed and put into use tile line and corrugated roller processing, production, manufacturing workshop, advanced processing equipment in the workshop, a number of fully automatic control of CNC machine tools in accordance with the requirements of the product processing drawings stored in the bar code, Standard, accurate processing and production. Plasma cutting, drilling, and welding are all completed. All the processed products are computer controlled, recorded on the record, and sent to the parts warehouse. The entire warehouse is equipped with accessories worth 25 million euros. The motors produced 20 to 30 years ago have Spare parts, such as motors that Siemens does not currently produce, BHS spare parts can be used instead, and various accessories can be changed at any time for the user's urgent needs.

The delegation visited the tile line, single-sided machine, and double-sided machine assembly shop. The site is being equipped with the newly developed 2.8m single-sided machine. The pressure belt type single-sided machine newly developed by BHS can produce 450m paperboards at the fastest per minute, and 885 sets of pressure belt type single-sided machines of different speeds have been sold worldwide. Licheng, Jiangsu, China has purchased a pressure belt type single-sided machine that can produce 400m at the fastest per minute.

The delegation visited the tile line slitting and cross-cutting machine assembly workshop. As in the single-sided machine and double-sided machine assembly shop, the requirements for quality are extremely strict, and the words “Producingqualityeverydayeverywhere” and “The quality is higher than everything” are placed on the wall. The most striking place in the middle reminds everyone of the importance of product quality, rigorous, disciplined, and meticulous as a symbol of quality assurance. It is also possible to see why BHS tile can be sold all over the world.

The delegation visited the staff training center. All types of internships in the center are well-equipped for operation. The center not only cultivates the processing workers required by its own enterprises, but also recruits students to the society, pays for training, training courses for three years, half the time for study, half the time for internships, and awards after completion of graduation. Certificates and excellent talents are selected first to ensure the strong processing and assembly team of BHS and to ensure that BHS continuously produces products with first-class quality and high quality for global users. The rest of the students are recommended to the community.

Shanghai Ding Long, Zhuzhou Sanxin, Shanghai Muir's chairman and Haili Chief Engineer talked about the high-level cutting and welding technologies involved in the BHS processing process. These technologies are both energy-saving and environmentally-friendly, and at the same time they have replaced the traditional process of casting and pollution and have caused significant improvements in product quality.

After the visit, everyone had a more intuitive understanding and comprehensive understanding of BHS' tile-laying equipment and corrugating rollers. Finally, the president of BHS specifically communicated with everyone to understand the development prospects of Chinese paper packaging. Chairman Ding Longding of Shanghai focused on the development of the company and discussed and communicated with the president of BHS on the development of the Chinese corrugated carton packaging market in the next five years. The president of BHS asked in detail the Shanghai Dinglong waterborne press in the Chinese market. Development trends, development models, and scale of development determine from this perspective the direction of BHS development in China. Seeing the same hero, BHS and Shanghai Ding Long are at the helm of the two giants, expressing their confidence in the development trend of Chinese paper packaging.

In the past three years, BHS’s greatest progress has been the improvement of concepts. From the 2011 visit to China’s equipment manufacturing peers, to the opening of the Chinese user and equipment manufacturer peers throughout the year, this has not only deepened mutual understanding, but also established With friendship, every visitor has become a witness and communicator of BHS product production.

In the evening, the delegation visited the Imperial Palace Hotel in Bayreuth, Germany. The hotel is located at the foot of Castle Peak, surrounded by green meadows, blue sky and white clouds, green mountains and green areas, each other, the scenery is not beautiful. The appearance of the hotel is grand and ancient, while the interior is luxurious and modern. Few Chinese tourists frequent this place. The delegation was fortunate to enjoy the good service of the Palace Hotel. It seems that everyone has been a king and a queen.

On the morning of June 6, the delegation visited the CONPRINTA printing technology company in Coettingen, Germany, for more than four hours. It was warmly received by Mr. Tim, the president of the company, and Mr. Cartellieri, director of sales and marketing, briefed the company on the company's profile.

CONPRINT Printing Technology is the inventor and producer of innovative Conprinta-IMD preprinting equipment. The device uses a patented tracked preprinting technology. The company has more than 20 years of rich experience in flexo printing manufacturing, assembling expertise in two areas of corrugated packaging and printing press production, combining unique track-type technology with servo motor drive, enabling continuous use of preprints To complete the order production, it can also be called "continuous uninterrupted operation."

The Conprinta-IMD preprinting machine greatly reduces the boot preparation time, quicker replacement time, and up to 90% normal operation rate, so it can meet the demand for high production. Achieving high profits requires reducing production and investment costs. Conprinta's preprinting machines help increase the user's capital utilization. At the same time, the combination of patented tracked technology and IMD servo drive technology has become an innovation in the industry. The printing press adopts a robust structural design. All parts are in line with industrial quality requirements, and therefore require little maintenance and guarantee a high level of assurance. The operating rate. At present, there are many applications in the European market, and more than one device has entered the US market. Japan and Thailand have each introduced one. China introduced a device a few years ago and its market prospects are particularly promising.

At noon, Mr. Cartellieri and the marketing director of Stephanie hosted a dinner for all members of the delegation.

At 1:30 pm, we went non-stop to Conprinta Technology's user company, THIMM Carton Packaging, to investigate the production of preprinted technical presses.

THIMM is a powerful group company with an annual output value of 450 million euros, 2500 employees and 14 factories in Europe. It mainly produces corrugated carton packaging products for home appliances, electronics, food, medicine, automotive logistics and other industries. Everyone enthusiastically visited the pre-press design and color management department and the printing plate making shop of the plant, and visited the on-site production operations of the water-based preprinting machine. A seven-color unit purchased in 1996 and an eight-color unit purchased in 2002 are in process production. There are only five workers in the workshop to operate the production. The quality control console and automatic ink distribution system are also provided. Quality prosecution system can check the quality of printing at any time. The printing speed is fast and the printing quality is better.

After the visit, everyone thinks that the water-based preprinting machine is characterized by: 1. Printing on grey whiteboard paper; 2. Changing orders quickly; 3. Reducing costs, applicable to the printing quality is not necessarily demanding, large quantities, such as food containers, Heavy-duty containers, large and medium-sized fruits, and agricultural and sideline products cartons are promising prospects for development.

(To be continued)

Faucet

Yuyao Sanyin Bathroom Technology Co Ltd , https://www.chinasanyin.com