Does the smart lock need maintenance? Strictly speaking, the smart locks that pass the test will be aging tested before leaving the factory. Generally, there is no need to carry out special maintenance on the smart lock. After all, the smart lock is basically a matter of time compared with the car. However, if you have some skills in installing the smart lock, you can extend the life of the smart lock. Lightly open Today's family cars have become popular with self-priming doors and can be closed gently. Although the home door does not have the term "self-priming", do not close the door vigorously on the door with the smart lock installed. Unlike traditional mechanical locks, the internal printed circuit board of the smart lock cannot withstand physical shock due to the material. It is more fragile than mechanical parts. If the force is too strong when closing the door for a long time, it is likely to cause poor contact and board. Breaking and other issues. Too much force when closing the door can also cause a situation, and this situation is not only easier to encounter, but also very embarrassing. The smart door locks of commercial apartments have become very popular, and the faults encountered by users are also typical. There have been cases in which the battery is broken out of the battery compartment due to the forced closing of the door by the residents, and the smart lock is directly powered off. At that time, the smart lock of the commercial apartment did not have an emergency power supply interface, and the residents also spent a lot of effort to enter their home. Lubricate the keyhole with graphite Generally speaking, lubrication, you will think of what? Lubricating oil? Vaseline? But for locks including smart locks, it is more suitable to use graphite for lubrication. Although the lubrication with lubricating oil will have a certain effect at the beginning, the lubricating oil will also absorb more dust. The long-term use will make the lock more sturdy, so the unlocking masters will not use the lubricating oil to lubricate the lock. It is the use of graphite instead of lubricating oil. The pencils we use in elementary school contain graphite. If there is no pencil in the house, it can be lubricated with talcum powder or candle powder. It is used in the same way as graphite powder lubrication. It is blown into the keyhole and then twisted several times. This completes the lubrication and maintenance of the lock. Let the water go farther from the smart lock, the better Today's smart locks are mostly for apartment users, and smart locks that can be used outdoors in villas are not only small, but also expensive. Most of the smart locks that are currently on the market do not have a special design for waterproofing, so smart locks are still more afraid of water. After all, there are many electronic components in the smart lock, which also plays a very important role. Although fingerprint unlocking on mobile phones now supports wet hand unlocking, I still don't recommend using wet hands to unlock them on smart locks. The smart lock fingerprint module is not waterproof for one reason. Due to the cost and working principle, wet hand unlocking is not supported, and the intuitive embodiment is to affect the success rate of fingerprint recognition. So usually it is better to let the water go farther from the smart lock. Bowl chopper and vacuum mixer are widely used in sausage production line,including bowl cutter,bowl chopper,meat mixer,vacuum bowl cutter,vacuum cutter,vacuum mixer. Only the excellent performance machines can guarantee the high quality of products. 30 years of experience allows us to design the most advanced chopping and mixing machines. Vacuum sealing technology is applied in these machines preventing protein and fat being oxygenized and damaged, keeping freshness, original color and taste, reducing air bubbles and enhancing flexibility.
Bowl cutter can cut meat into emulsified paste by high speed chopping knives and mix up other additives into meat sufficiently.
Bowl cutter series:
High speed bowl cutter 80L
High speed bowl cutter 125L
High speed bowl cutter 200L
High speed bowl cutter 330L
Vacuum bowl cutter 125L
Vacuum bowl cutter 200L
Mixer series
Common meat horizontal mixer 60L, 150L, 400L, 650L, 800L, 1200L
Vacuum meat horizontal mixer 60L, 150L, 300L, 650L, 800L, 1200L
The application of Chopper And Mixer Series
Raw sausage
Cooked sausage
Smoked sausage
Scalded sausage
Canned meat
Pies
Soups and sauces Industrial Meat Mixer,Vacuum Meat Mixer,Chopper And Mixer Series,Bowl Cutter,Bowl Chopper,Meat Mixer,Vacuum Bowl Cutter,Vacuum Cutter,Vacuum Mixer Helper Machinery Group Co., Ltd. , https://www.helperfoodtek.com
The vacuum mixer adopts double shaft and helix paddle structure, which will mix raw material in circle movement, to reach the perfect mixing effect.
And much more ...