Welded Mesh Fencing
Welded mesh fence, or Welded wire
fence, Wire mesh fence etc, usually adopts low carbon steel wire,
galvanized wire, s.s.wire etc, then welded and finished with pvc or
powder coating. Zhuoda welded wire fence enjoy the features like
beautiful, high strength, good regidity etc.
Welded wie fence is always used in
highway, railway, airport, factory etc, also can be utilised for the
pretection in residential area, school, municipal engineering etc.
Reasons: 1 is the ink has expired; 2 is because the pigment formed a large flocculation and precipitation; 3 is the ink itself is relatively thick, the viscosity is not high viscosity and poor plastic fluid; 4 is stored in addition to layering, Apart from the analysis of hydrazine and precipitation, the binder in the ink system is not stable; 5 is the addition of poor thinner or varnish, etc. during packaging printing.
Methods: 1 Add phenyl ether or propyl ether produced by Shanghai Jinshan Chemical Plant; 2 ink layering problems, such as polyamide and nitrocellulose mixed, usually first put the cotton liquid, and then add the polyamide solution while stirring, and immediately eliminate; 3 When several resins are blended, it is best to use 3% to 5% of ethylene glycol phenyl ether or propylene glycol stupid ether to make the polymer take the polymer to mutual solubility; 4 to change the dilution solvent (do not delaminate after diluted with the ink, Turbidity and whitishness; 5 Add TM-27 coupling agent, bentonite or white carbon produced by Tianyang Chemical Factory; 6 The problem of precipitation of ink (surface like a layer of resin liquid), generally due to solvent and resin If the solubility is not balanced, if you find a solution, first, calculate the solubility of the solvent and the resin. Try to reach an agreement as much as possible. Generally, the energy is greater than 0.75, and the lower 0.75 is better; the second is the addition of expansive clay, but the composite printing ink Usually, silica is added to prevent the precipitation of pigments; 7 ink precipitation problems, such as 6 will also lead to precipitation, once the failure occurs, the resin should be increased, and reduce the amount of pigment and filler; add wax and soil; extend the grinding time / Oil The finer the fineness of the ink, the better; and add the TM-27 coupling agent (that is, increase the concentration, but also increase the adhesion); 8 put a stir bar in the ink fountain; 9 then spread the ink to filter; 10 change New ink; (11) Add universal solvent to make the several resins in the ink system reach mutual solubility; (12) choose high viscosity ink; (13) choose light weight pigment or use deflocculant; (14) add strong solvents with strong solubility.
Company profile:
Anping County CQ Wire Mesh Co.,Ltd, established in 2010, and located in
the Hometown of Wire Mesh in China, is a professional leading
manufacturer engaged in the production and sale of Gabion, Welded wire
mesh, S.S.wire mesh, Fences etc.
Dedicated to strict quality control and thoughtful customer service, our
experienced staffs are always available to meet your requests. All of
our Gabions manufacturer meet or exceed ASTM or EN Internation standard,
and our products also have passed the ISO9001 Certificate with our high
quality. They have been exported to many countries like USA,
Australia, U.K, France, Italy, Philippines, Kenya, Thailand etc until
now.
Anping County CQ Wire Mesh
Co.,Ltd wishes to create a bright future with customers on the base of
equality and mutual benefit and sincerely welcome friends from all over
the world to vist us. We look forward to being of service and offer
a quality and friendliness that is synonymous with CQ Wire Mesh.
Welded Mesh Fencing,Welded Wire Fence,Steel Welded Wire Fence,Metal Steel Wire Mesh Fence
Anping Chuangqian Wire Mesh Co., Ltd , https://www.cqwiremesh.com