Taihe Fangyuan Muye Co.,Ltd , https://www.fyofficefurniture.com
First, prepress
1 Dew/Leak: The printing paper is mostly red. When printing or making a plate, the color of the connection is not lenient and the white background is exposed.
2 Play red: the photographic process of the online age. Remedy the darkness of the Internet image, or move the original flash once or lift a sheet of paper to expose the spotlight, or use the flash light directly to flash the text to add depth to the text and soften the image.
3 Bulge: Overeating will of course be fat, and the film will have more light and will expand the site. Handprinting is even more exposed in the photosensitive film plus transparent thick film.
4 Trapping (Colortrapping): When the color separation is made, it is intended to make the color contact position expand and burst, thus reducing the impact of overprinting.
5 Field: refers to the area of ​​color blocks that do not have outlets, which usually refers to the modest version.
6 Inverse: Text or lines are printed with a negative pattern. Paper is white.
7 Touch network: not fishing workers. The color separation process of the AM network, misalignment of the network angles, or the interval between each screen is less than 25. , Moire began to show.
8 FlyNet: Lens-plate hanging process, after normal exposure, discarding the net to make up for the long-term exposure increased contrast.
9 Dog teeth: Dog teeth are intertwined. Insufficient pixels in the picture, and the appearance of dog teeth on the edge after amplification.
10 Rose points: like a flower deer-like texture. Poor calling pattern, worse is the moire.
11 Qitou: Directives on the layout, with the prefix as the baseline. Extended to imposition and binding, referring to the head position of the edition.
12 scattered tail: a type of text layout. Only the vocabulary is unified, and the final text is not neat.
13 Sufferers: Not Ecstasy. It is a masking film for manual color separation. It can be used in film drying or red film cutting. It can be used for retreat or color correction.
14 Blue: Not basketball, not RGB B (blue), but the C (Cyan) version of CMYK.
Second, printing
1 Ghosts: Unknown prints or shadows. Due to the uneven ink supply of Chen type printing presses.
2 melon fight: does not mean water melon hit dog. During the letterpress printing period, the "Ukrainian Party" used the typeface to lower the position of the lead particles.
3 fight: teach Monkey King good show. The top printing car has an active paper-folding installation to bite the paper and the printed surface, and the back-biting paper is printed at the end of the printing, and the paper is broken.
4 Reflexive: Refers to a diligent printing method. After the paper is printed on one side and dried, turning the left and right of the paper and inverting the bottom surface is called the bottom reflexive version, while the tail of the paper is reversed when the bottom surface of the tooth is reversed. The printing plate is unchanged, and the paper is printed on the surface.
5 Flying ink: The printing press is fast and blunt, and the ink body is not thick enough, leaving the ink splashing.
6 ink line: draw a rule on the printing plate, so that exactly printed on the paper gauge, can be inscrutable monitor needle position.
7 Fouling: The printing plate is poorly watered and becomes oleophobic. Of course, it is a thin layer of oil. The problem is that the acidity of the water in the bucket is not correct.
8 artillery: artillery, roller commonly known. The blanket cylinder separates the movement of the impression cylinder.
9 Clipping: Too much paper is pinched between the impression cylinder and the blanket cylinder, and the fuse senses the end of the press.
1 0 snoring: The printing press stops moving, mostly because the paper feeding is not smooth or the single sheet feed triggers the safety device.
12: Not the status of injection. Stamped edge position. Whether the paper is correct or not, printing and color printing need to have a needle position.
13 Shai: thrifty film drying process. Use the register cross to move the exposure.
14 Bottom: Terms of Printing Incidents. The ink layer is too thick and really dry. It infects the reverse side of the paper.
15 Heads (Sound Up): The Philippines called the driver the front. The front of the printing is not the captain, but the number of printing revolutions.
16 Numbers: The number of prints in the lithographic era. Embossed paper once called a stone.
17 Hands: Not referring to second-hand goods. Refers to the printer's deputy, or ç‡æŽ£.
18 Manuscripts: It is not that the manuscript is written. Instead, a proof of the official printing is preprinted through a proofer.
19 Tatsu: It is not a courier. It is a delivery device for printing paper.
Third, nailing
1 Blood: He should have been bleeding with a knife. The printing and binding process should be used to provide the ground color or picture of the page, which must be 3mm across the cutting line, which is called bleeding.
2 sides: fly, cut, remove meaning. Flash edge refers to the removal of the bleeding edge, which is a binding term.
3 oblique: deformation, cutting æª æª ç›´ ç›´ ç›´ ç›´ ç›´ , ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´ ç›´.
4 Light: The printing sheet is treated with a twilight roller, which is lubricated by name. This is a processing surface treatment process.
5 Hand-fold: Origami of the Japanese folding machine. 32 fold 4th fold to be folded.
Version 6: Not software. The edition where the book's first code is located is called genuine, the sub-code is called the counter version, and the pros and cons are called a group, a post or a box.
7 Gate: It is not the paper closing door. It is a paper cutting machine.
8 Horse nails: A method of book binding, such as moving across the belly. Thin book (6 posts or less) is put on the iron frame and put on the iron nail.
9 bowel Shu: A method of folding the book, such as roll rolls, with 3 shuttles 2 shuttles can be folded 32 version.
10 Organ folding: A method of folding a book. The book breaks open like a screen.
11. Reverse cover: A method of manually binding the cover, first set the glue on the bottom edge, then cover the edge of the spine, and then make an "anti-" cover action.
Book 12: It is not a long hair of the book. It refers to a blank book that has been locked but not on the cover.
13 Taro cloth: The strips of paperback cover each section of the bookback. It plays a sturdy and masculine role.
14 Hot Stamping: A kind of add-on action such as hot stamping on the cover of the cover, with high humidity.
Fourth, typesetting
1 Tune: Many of the photos in the light of course are bright silver and white. There is no network of high-light spots in the daytime job style to extend the image quality.
2 tone: not a strong voice, refers to the picture dim, or dark tone.
3 Machine: Not a terrible event. Insufficient memory or disk space will cause the computer to die.
4: Does not mean component. It is a measure of font typesetting. The smallest unit of English letters is Point, and 1 inch is 72 units.
5: Not referring to the class, the era of optical photo-taking means the size of the text, and 4 is 1 mm.
6: Not referring to the horn. It refers to the font size of the printing age, the largest special character is 72 lbs, and the smallest 8 is 5 lbs.
7 Body: Not referring to hairstyle, but refers to deforming the block type with the lens to make the word flat. Flat 1 is 10% (10%), flat 2 is 20%, and flat 3 is 30% 4 is 40%.
8 Body: Not referring to the body type, but to the narrow body, which is 1 narrow and 1 long, 2 narrow and 2 long, 3 narrow and 3 narrow, and 4 narrow and 4 long.
9 pens: Use a gas brush to apply the air brush. Hand-made gradient methods before the DTP era.
10 bytes: A holiday that is not a text, is a unit Byte of a computer machine language, and 8 bits are equal to one byte.
In the whole process of printing, frequently used printing languages, printing terms, printing technical terms: