Fabric Bed,modern fabric bed,luxury fabric bed,minimalist fabric bed Foshan Poesy Furniture Co., LTD. , https://www.poesyfurniture.com
Patent name: Method for producing a plant straw container and plate Patent applicant Zhang Baodang Applicant's address 430081 No.12, 40th Street, Qinghua District, Wuhan, Qingshan District, Hubei Province, PRC Inventor Zhang Baomin Application (Patent) No. 200510018419.0 Date of Application 2005.03.23 Certificate date approval announcement number 1657250 approval announcement date 2005.08.24 specification CD-ROM D0534 main classification number B27N3/02 classification number B27N3/02; B27N1/00; B27N3/08 division Original application number Priority item Abstract A plant straw container and In the production method of the board, 10 to 15 parts by weight of straw or waste paper or a mixture of straw and waste paper is crushed into particles of 5 mm or less, and 2-4 parts by weight of gypsum slag is crushed into particles of 1 mm or less. The raw material is added in 0.5-2 parts by weight of water, mixed uniformly, hot pressed and molded, and the surface is sprayed with a water repellent agent. The strength and rigidity of the finished product are high, and can be made not only into disposable utensils, but also can be made multiple times. The used packaging containers such as trash cans, trays and various packaging containers can also be made into a variety of specifications. The production process is simple, has no pollution to the environment, the raw material cost is low, the manufactured product is easy to be degraded, and the added value of the product is high. Sovereignty Item 1. A method for producing a plant straw container and a plate, which uses natural plant fibers as a main raw material, and is characterized by the following steps: 1 Mixture of 10-15 parts by weight of straw or waste paper or straw and waste paper Crush into particles of 5 mm or less, and pulverize 2-4 parts by weight of gypsum residue into particles of 1 mm or less. 2 Add the above raw materials to 0.5-2 parts by weight of water and mix well. The temperature is 200-240°C and the pressure is 120. - 160 kg/cm2 hot pressing for 1-2 seconds to obtain a molded body. International Application International Announcement Date of Entry into the Country Patent Agencies Wuhan Chutian Patent Office Agency Address Agent Ray