Although there are more and more electrical products used in the home, the most basic and necessary electrical appliances should be regarded as the lamps in the home. Nights without lighting tools are very inconvenient. The purchase of lamps and the quality of the lamps have also become a key issue in the purchase of building materials. How to compare the quality of the luminaire is also a knowledge that consumers need to understand. The following small series will introduce you to these issues. First, the appearance of the lamp to check the appearance of the lamp 1, mark We can learn a lot from the appearance of the luminaire, especially the brand, model and voltage power of the luminaire. You can understand the most basic problems of this luminaire. Judging from these problems, whether the luminaire meets our requirements for use; the limitation of rated power is also critical. For example, the luminaire we purchased is rated at 60W, but we can install a 100W bulb, which will damage the use of the luminaire. Causes conduction to occur. 2, anti-shock device Because there are gaps in the types of lamps, there are some commonalities when choosing lamps. Just as all appliances are energized, we should not touch the parts of the electric shock. If it can be touched, it is leaking. When checking, we can use our smallest finger to touch without power. If it is not touched, then this luminaire is in line with our requirements. Second, check integrity This is very important. The integrity of the luminaire is not only related to the wolf of the luminaire, but also closely related to our safety. During the inspection, it should be judged whether there is protection at the output hole of the wire, and there should be no sharp edges, otherwise the wire will be cut and the conductive phenomenon will occur; the movable lamp, such as table lamp, floor lamp, etc., should have a fixed wire device at the entrance of the lamp. Its function is to prevent the power line from touching the heating element when it is pushed back and forth, causing the insulated wire to heat up or even melt, and it is easy to cause a conductive phenomenon. Third, check the accessories of the purchased lamps If an electronic ballast is used for the luminaire purchased, a luminaire with an abnormally protected electronic ballast should be used. What is abnormal protection is the protection that the luminaire performs during the use of the line in an unconventional state to ensure the normal operation of the current device. The above is about how to compare the quality of the lighting, I hope to be helpful to everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net, and help you plan a reasonable space layout and beautiful design through the professional designer's on-site measurement room. >> Click here for professional designer free room design Pet Carrier Bag,Single Shoulder Dog Bag,Puppy Bag,Single Shoulder Carrier Bag Yangzhou Pet's Products CO.,LTD , https://www.paiqipets.com
