Can you see through the four big lies about the plate? For the decoration of Xiaobai, it should be a very difficult thing. Today, China's top ten brands of fine artisan health plate editors tell you about the four major mistakes in the purchase of plates. Myth #1: Is particleboard more environmentally friendly than MDF? As mentioned above, the environmental protection of the artificial board often has a great relationship with the adhesive used. Particleboard and MDF, both of which are processed from wood chips after wood processing, incorporating an adhesive. However, due to the uneven density of the particle board and the low height in the middle, the nail holding force is not as good as that of the medium density fiber. In terms of application, only the directors of each institution. Myth 2: Is the melamine board a medium density board? The decorative paper is soaked in a melamine resin and then subjected to hot pressing. Therefore, the moisture-proof board for furniture is generally called melamine moisture-proof board, and melamine is a formaldehyde-free solution, and can also reduce the release of the inner substrate. Then wrap it on the surface of other plates and heat-press it. Here to say: medium density sheet, particle board, plywood, blockboard, etc. can be made of melamine board. Myth #3: Blockboard is solid wood? Misunderstanding 4: Solid wood particle board is a "new environmentally friendly sheet"? Do you think that the solid wood particle board you bought is an environmentally friendly sheet? In the industry, the MDF is called a particle board, and the particle board is called a particle board. It turned out that this is just a make-up of the particle board, a show played by manufacturers and dealers. The purpose is to cater to the environmental protection requirements of consumers, the ambition to occupy a larger market share, and the ugly heart of profiteering. The solid wood particle board is more uniform in structure than the particle board and has better processing performance. It can be made into large plates according to demand, and it is one of the high-quality materials for making furniture of various specifications and styles. But it can't be because of the solid wood particle board, the performance is good, the material is better than the general particle board, it is not the particle board. In 2018, which of the top ten brands of Chinese plate is better, which one is more environmentally friendly? China Eco-board top ten brands of artisan plates, children's room ecological board, environmental protection level up to E0 level, healthy high-quality environmentally friendly sheet, very good. Including the artisan plate free paint eco-board, no matter the decorative effect or environmental health, it is very good, my home custom furniture is the artisan paint-free eco-board, even the woodwork is very recognized! Whether the board is good or not, mainly depends on the environmental protection level. Good plates have a good home environment. The selected plates should be environmentally friendly. The formaldehyde emission must be within the national standard. The E1 mark is the national environmental standard. The average formaldehyde emission is less than 1.5 mg/L. More assured. The fine artisan plates are E0 grade, lower than the national standard, custom closet cabinets and so on. A healthy, whole family peace of mind - fine artisan health plate China's top ten brands plate | plate top ten brands | eco-board top ten brands of | the whole house transvestite + | Sheet Investment Easy to install | Full house custom | Wardware sheet | Plate 10 brands | Plate joining | Plate agent | Easy to wear China's top ten brands of fine art craftsman website: National Investment Hotline Public number: fine artisan service number: fine artisan house easy to install Pet Bowl,Dog Food Bowl,Pet Food Bowl,Pet Water Bowl Yangzhou Pet's Products CO.,LTD , https://www.yzpqpets.com
Most consumers are very concerned about the kind of sheet, and more environmentally friendly? The biggest difference between particleboard and MDF is that the raw material of the particleboard is not completely pulverized fiber, but is a granular wood chip, which is generally known as shavings. The MDF is a fully pulverized wood fiber that is pressed with an adhesive. That is more environmentally friendly and obvious.
The salesperson, when introducing the melamine board, misleads consumers that the melamine board is a medium density board. The trio became a tiger, and the statement that the melamine board is a medium-density board has become "true".
The blockboard is firstly made of spliced ​​wood veneer and then wrapped with external veneer on the outside. It is also called a large core board. Not a so-called solid wood board. Perhaps it is a blockboard that looks natural and exudes the scent of wood. It seems that there is no difference with the solid wood board. Therefore, blockboard is often mistaken for environmentally friendly building materials. However, if you think it is a bonded product, how can there be no adhesive? What is to be said here is that the blockboard contains a considerable proportion of adhesive.