With the advent of printers, some people now use printers at home. The price of an ordinary home printer is very cheap, about a few hundred yuan. Printers generally need to install ink. Some printers use disposable ink tanks, and you can purchase new ink tanks for installation after use. However, some ink tanks can be used twice, and you can continue to use them by directly adding ink. Below, I edit how Amway hp color ink cartridges are added. Method of adding ink to Hp color ink cartridge: ①First of all, we have to find out the color ink cartridges of the HP printer and remove them from the printer. Then there is usually a label on the color ink cartridge, tear it off. Because when refilling ink, the hole for refilling ink is under the label of the ink cartridge. ②After the label of the ink cartridge is torn off, we can start to drill holes in the ink cartridge. Drilling is also relatively simple, because the ink cartridges that can be filled with ink generally have a direct hole, and can be drilled using a small needle or sharp object. ③ After we have drilled the holes, we can use a professional refilling syringe to refill the ink. When adding ink, you must be careful not to add the wrong ink, otherwise the printed things will be colorful. Colored ink cartridges generally have three holes, the one on the top is red, the one on the left is blue, and the one on the right is yellow. There is also a black hole, which is specially filled with black ink. The color ink is added in accordance with 4ML. Each one adds so much. Generally, three colors are added, because basically all colors are printed by mixing these three colors. The ink in the black ink hole is to be added with 8ML. ④When we add ink, we must pay attention that the position of the needle tube needs to be inclined, and it should be added slowly and slowly. It cannot be added all at once, because there is pressure inside the ink. If the injection is too fast, it will cause the ink to flow out of the nozzle. ⑤Remember that only one color can be added to each hole, not mixed, and the syringe should be cleaned after adding ink. I have finished introducing the steps of adding ink to Hp color ink cartridges. Now do you learn how to add ink to hp color ink cartridges? Most ink cartridges add ink in the same way. Holes, be sure to see the color clearly when adding ink, and do not add it randomly. Adding ink indiscriminately can cause the ink to become unusable or not print color. Everyone should know that the ink of the printer is very expensive, so be very careful when adding ink. Sliding Door Roller,Sliding Gate System,Sliding Door Systems,Cupboard Sliding Door Systems Wenzhou Zhaoxia Hardware Co.,Ltd , https://www.zhaoxiahardware.com