The CTP processor is a complete plate processing system that includes development, water washing, fixing, drying and some enhancements. It is an important part of the CTP process. Due to the fast imaging and development speed of the violet laser CTP plate, the plate processor is required to be matched. After the printing plate is exposed, it needs to be developed, washed, fixed and dried. CTP processor common faults: 1, the development temperature is too high (low) When printing, sometimes the temperature of the liquid in the developing tank is too high. By checking the parameter setting of the machine, it is found that the developing temperature is higher than the default temperature. Under normal circumstances, the liquid in the developing tank passes through the circulation pump about 15 minutes after starting the machine. The heating or cooling system will reach the required temperature. 2, the sink temperature is high (low) After the device is turned on, the development and fixing temperatures should reach the default values. If the temperature of the solution in the tank does not reach the set temperature, a fault display will occur. Article source address: http:// Small cultivator is a construction machine that breaks, loosens or cracks the hard soil layer with soil loosening teeth. It is mainly composed of motor, reduction gear, walking mechanism, soil loosening knife, depth adjustment mechanism and so on. The motor provides power and is connected to the reduction gear shaft by a coupling. The working parts are composed of the cutter head and the vertical loose soil cutter, which are divided into two groups and driven by the reduction gear. The depth adjustment mechanism is composed of a handle, a sprocket and a chain, which can adjust the depth of the soil by changing the height of the frame. roto tiller,agricultural mini power tiller,garden tiller Shaoxing Haotuo Machinery CO., LTD. , https://hotochainsaw.com