In daily life, the faucet is one of the most common products and is the product with the highest utilization rate. Although the surface of the faucet looks simple, the water dragon is small and convenient to use. Therefore, many people have special concerns about the structure and principle of the faucet. Of interest, so today we take a look at what the faucet looks like, but also understand the structure and principle of the faucet. Let's take a look at the details. Faucet structure and principle: 1, vegetable basin faucet structure and principle: The tap of the vegetable basin is mainly composed of a spiral valve core, and mainly relies on the rotation of the valve rod to generate a displacement through the thread to achieve the effect of opening and closing of the water inlet hole. When we rotate the valve stem, the thread engages to advance and retreat the sealing end of the valve core. When we twist the valve core in, seal the inlet and seal the position of the outlet. Rely on the sealing end of the valve core and seal the outlet. To achieve alternating cold and hot water. The working principle of the spiral valve core of the faucet is mainly through the rotation of the valve rod, so that the T thread is displaced to achieve the water hole switch. When we rotate the valve stem, the thread engages. The sealing end of the valve plug enters or retreats, and when it enters, the closing effect is achieved, and the retreating is the effect of the discharging water. 2, bathtub faucet structure and principle: In general, a bathtub faucet is used to make water enter the main body through S-shift, but first, it also needs to enter the spool and flow from the spool into the main body. The water enters the hole in the left side of the commutator in the main body, and the opening and closing of the water flow is achieved by lifting the commutator. The commutator inside the faucet works as follows: The commutator achieves the function of switching the bubbler and shower channel inside the main body through the seal ring and the main body. Note that in the commutator we see, the centerline must be symmetric, and if it is asymmetric, it will leak. 3, bathroom basin faucet structure and principle: Simple basin faucet diagram, it is a single ceramic valve core surface, mainly composed of handle, valve core, water inlet braided pipe and installation gadgets. Next, we will introduce the working principle of the ceramic valve core: In general, the bottom of the ceramic valve plug consists of three holes. One of the two holes is used to enter and exit the cold water, the other is used to enter and exit the hot water, and the remaining one is used to discharge the water inside the valve plug. The cold and hot holes of the faucet valve core have seal rings to ensure that the oblique street of the main body is in a sealed state. After the cold and hot water inlet pipes are connected, the hot water pipe and the cold water pipe line correspond to the two holes of the valve core. The spool mainly controls the opening and closing state of the two holes, relying on the movement of the ceramic plate to work. Through the introduction above, I believe we all know that different types of faucets have different structures and principles. Therefore, when purchasing faucets, we must also look at their actual needs. If bathrooms are used, they have to buy bathrooms in the Internet. The special taps are used so that they can be used more conveniently. <\p><\div> Live Animal Cage Traps,Animal Cage Traps,Rat Trap Cage,Cat Trap Cage Hebei Liebang Metal Products Co.,Ltd , https://www.lb-animaltraps.com