Multipurpose wire baskets can definitely bring more convenience for your life. All products are under strict inspections to ensure each piece has good strength and stability. Unique metal frame with guardrail design, which can better prevent the things on the shelf from falling. Hold your shampoo, soap, conditioner, lotions in the bathroom.
Wire Baskets,Bathroom Accessories Tray,Toilet Paper Holder Basket,Toilet Paper Storage Basket Kaiping Yufa Sanitary Ware Co.,ltd , https://www.yufabathroom.com
Guide: Solid wood custom furniture is not only natural and beautiful compared to other materials, but also has a long service life if properly maintained. With the advent of winter, the temperature is lower, the air becomes dry, and expensive furniture made of solid wood is particularly prone to problems at this time. Next, let us take a look at how to maintain solid wood custom furniture?
1. Pay attention to the cleaning and maintenance of the furniture surface. The surface of solid wood custom furniture is painted with paint, which is especially important for the maintenance and maintenance of the paint film. Once the paint film is destroyed, it not only affects the appearance of the surface, but also further affects the internal structure of the product. Therefore, the furniture should be kept clean frequently. Use a soft cotton soft cloth to gently test the surface dust every day. At intervals, use the wet cotton thread that wrings out the moisture to clean the dust from the corners of the furniture. Clean and dry soft cotton cloth can be dried.
2. Avoid using alcohol, gasoline or other chemical solvents to remove stains. Solid wood custom furniture surface, if there are stains, do not rub hard, gently remove the stain with warm tea, wait until the water is volatilized, apply a little light wax in the original part, and then lightly grind several times to form a protective film.
3. Avoid hard objects scratching. When cleaning, do not let the cleaning tools touch the furniture. Usually, be careful not to let the hard metal products or other sharp objects collide with the furniture to protect the surface from scratches.
4. Avoid wet conditions. In the summer, such as indoor flooding, it is advisable to use a thin rubber pad to separate the furniture from the ground, and at the same time keep the wall of the furniture at a certain distance from the wall.
5. Keep away from heat. In the winter, it is best to place the furniture at a distance of about 1M from the heating flow to avoid high-temperature baking for a long time, causing local cracking of the wood, deformation and deformation, and local deterioration of the paint film.
6. Avoid direct sunlight. Outdoor sun exposure should be avoided as much as possible for the long-term exposure of the furniture to the whole or part of the furniture. It should be placed in a place where it can escape from the sun, or be separated by direct sunlight. In this way, it does not affect the indoor lighting, but also soft light to add a warm and romantic atmosphere to the living room, while protecting the indoor furniture.