The printer plays a very important role in our work, and the most important part of a printer is the toner cartridge, which determines the quality and effect of the print. Now many of my friends want to add powder and want to save the labor costs of adding powder to professionals. But be careful when adding toner to the toner cartridge, otherwise the print will be very bad. Today, we use the HP m1005 toner cartridge as an example to tell everyone how to add powder. What is the model of the toner cartridge used in the HP M1005 printer? What is the model of the toner cartridge for the HP m1005 printer? The toner cartridge model used by the hplaserjetm1005 printer is: Q2612A This cartridge prints A4 paper, 5% coverage may print 2000 pages Teach you how to add powder to HP M1005 toner cartridge 1, the first is to remove the toner cartridge 2, the upper magnetic roller, right and left right, pay attention to the gear part to be aligned 3, installed on the shelf, after the installation, turn the lower gear is flexible 4, install the side, pay attention to the spring on the magnetic roller, pay attention to the need to add powder before it can be installed, PS: I am because the hole in the powder, so do not need to add 5, after the two parts are merged, the holes are installed and the embolus is installed. 6, the iron bolt is fixed with the edge flush 7. After the two sides are fixed, you can install this roller. Just press the button on both sides and just press it in. 8, install this pull bolt 9, the photosensitive parts are installed, pay attention to the rotation before and after installation, is it flexible? 10. Install the last one. PS: I have opened a hole in the toner cartridge and added it to the machine.     The above is a small series for everyone to introduce the HP m1005 toner cartridge powder step, I do not know if you know how to operate, because at the beginning, Xiaobian also stressed with everyone, the quality of the toner cartridge will be good or bad Directly determines the effect of the printer, so Xiaobian here to remind everyone, if you are not sure, you must take it to help professionals, you can not just save those labor costs, if you accidentally, the operation fails, then It’s very troublesome. I hope the above content will help everyone. The canvas wig head is made of 100% cork. compared with poly filled canvas head, cork canvas head is more sturdy and durable. Canvas Block Head,Cork Wig Mannequin Head,Wig Block Head,Cork Head For Wig Making Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.lileaderbeauty.com
Professional canvas block head professionally designed according to human's head shape, have more refined appearance. You could put pins and hold wigs easily. Very easy and convenient to use, great for wig making, fixing wig making, styling and display.
The wig head base has mounting holes (about 1 inch in diameter) that match most Wig Stands or tripods on the market. The clamp stand is included in the package, please refer to the steps shown in the picture to install the clamp stand.
You can measure your head circumference by going around the head behind the ears from the nape of the neck round to the front hairline.
Cover the head with some plastic wrap before making wigs. Please put it in a dry and ventilated place. Please put it under sun once a month.