[ Chinese wardrobe net ] Plastic wardrobe is cheaper than wooden wardrobe, and it is very practical. When you move, if you don't want to consume too much energy, buying plastic wardrobe is also a good choice, but plastic wardrobes need to be installed by yourself, then Here we will introduce you to the relevant knowledge about plastic wardrobes, to understand the installation method of plastic wardrobes and precautions for installation. Plastic wardrobe Plastic wardrobe installation method? Plastic wardrobe installation tool Plastic wardrobes, track boxes and plastic facades that are generally purchased on the market have been produced and formed. In the process of installing the plastic door of the wardrobe, it is only necessary to fix the plastic door in the track box. The tools we need to use in this process are mainly six-grid wrenches, plum screwdrivers and hardware accessories. Plastic wardrobe installation method? Introduction of plastic wardrobe installation method 1. Identify and clean the main parts and installation positions of the plastic door. It is necessary to distinguish the plastic door up and down track boxes here. 2. The general E-shaped track box on the market is above, using screws and other hardware accessories, fixed on the upper end of the wardrobe, and the surface level of the wardrobe. 3. The track box like a flat plate is the lower end, which is fixed about ten millimeters from the cabinet surface, and the moving door is put in. In the final step, just use a six-grip wrench to adjust the height of the hole wheel to level the surface of the wardrobe. Plastic wardrobe installation method? Plastic wardrobe installation precautions 1. Since the sliding door is in contact with the wall or the sides of the cabinet, there is no other object in the contact position to block the closing of the sliding door. For example, the position of the drawer in the cabinet should avoid the intersection of the plastic door, and it should be at least 25px higher than the bottom plate; the drawer in the folding cabinet should be at least 375px from the side wall. Pay special attention to the power switch and socket on the wall. The sliding door should be closed and the position of the switch and socket should be changed. 2. Regardless of the ground on which you make any material, you must ensure the level, and the walls of the door opening should be horizontal and vertical. Otherwise, the door will be skewed after the installation is completed. The adjustable error is no more than 10mm. Do not install the corner line in the installation position. The plaster line can be installed on the sealing plate above the wall cabinet. If the door is directly to the top, do not install the plaster line. We have introduced you to the knowledge about the installation method of plastic wardrobes. Especially when it is only a short-term residence in a place, buying plastic wardrobes at this time is the most economical choice, and the plastic wardrobe is very sturdy and easy to handle. It is very cost-effective and comprehensive, it is worth buying.
Pop up aluminium foil sheets are pre-cut sheets that make dispensing so easy and convenient. They are perfect when wrapping sandwiches to take on the go, preparing foil packets for easy cooking, and lining pans for easy cleanup.
In addition to withstanding high heat and extreme cold, aluminium foil sheets are perfect for keeping food fresh. Aluminium foil sheets also offer an easy way to wrap and store leftovers, while ensuring that your food stays moist and tastes delicious.
Aluminium foil surface is clean, sanitary, no bacteria or micro-organisms can not grow on its surface.
Aluminium foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.
Aluminium foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.
Aluminium foil itself is not volatile, it itself and packaged food will never dry or shrink at high temperature or low temperature, aluminium foil will not have the phenomenon of oil permeability.
Pop Up Aluminium Foil Sheet,Pop Up Foil,Pop Up Aluminum Foil Sheets,Reynolds Wrappers Pop Up Foil Sheets Zhengzhou Eming Aluminium Industry Co., Ltd. , https://www.emingalufoil.com