Nowadays, custom furniture enters the domestic market. Because of its energy customization, fully satisfying the individual needs of consumers, and reasonable planning and utilization of space, it has gradually changed people's furniture consumption concepts and has become a popular trend. Next, the editor introduces how to choose customized furniture sheet.

How to choose customized furniture sheet

1. Process: Most of the panel furniture is drilled to install connectors, wooden dowels, shelf supports and other accessories, so you can observe whether the material of the plate is uniform, the arrangement is neat, and the color is uniform from the hole.

2. Color and gloss: The surface of a good plate should be shiny, and it can reflect to a certain extent under the light, giving a metallic texture.

3. Leveling: The leveling of the board is also the flatness of the board. The surface treatment of a good plate is also very good. The surface of the plate is smooth and smooth, and it feels smooth to the touch without touching the particles, depressions or fingers. The hardness and strength of a good plate are also excellent. If you scratch it with gravity or sharp objects, there will be no scratches, and the surface of the plate is as smooth as ever.

4. Trademarks: Well-known plate manufacturers will put their own logos on the plates they produce, some of them are embossed, some are gravure, you can carefully check whether there is a manufacturer's trademark on the plate, to identify the origin of the plate, as a judgement One of the standards.

5. Material density: You can see the core of the plate from the cut of the plate. The inside of a good plate should be uniform and fine, without any gaps. No matter where it is cut from, the cut is full, there are no seams or holes, and it is impossible to pinch in with fingernails, and it is impossible to leave nail prints on it.

6. Edge banding: In the process of making furniture, viscose should be added, and there will be certain volatile substances in the viscose, so it is necessary to adopt the form of edge banding to lock the gas in the plate and prevent it from volatilizing. The most basic treatment is two-sided edge banding. It is better to adopt four-sided edge banding, which is the most environmentally friendly treatment. The edge banding should be thick enough and tightly bonded to the core, without debonding.

7. Formaldehyde content: smell. Close to the veneer of the board, smell whether there is an irritating smell. If there is, and is irritated to tears, the formaldehyde content may have greatly exceeded the standard value, this kind of plate is not a good plate, long-term placement in the room will cause great harm to human health. Consumers can also check the relevant quality test report certificates of the merchants to ensure more protection.

8. Plate thickness: The standard cabinet plate thickness is 18mm, and the back and door panels are generally 9mm. Some small manufacturers will advertise their 16mm sheet as 18mm, so this aspect must be carefully observed. Measure the ends and middle of the plate separately. The smaller the tolerance, the better the plate quality.

9. Board weight: A good board is evenly wooded, with few or no impurities, and has a high density, so it is also heavy, and it feels like a drop in the hand.

How to identify whether custom furniture panels are environmentally friendly

1. Look at the level. There is a certain standard for the formaldehyde emission of the board. At present, the national standard suitable for the use of indoor custom furniture panels is E1 level, that is, the formaldehyde emission amount is 0.5mg / I ~ 1.5mg / I; and the E0 level standard with formaldehyde emission amount less than 0.5mg / I is about to be adopted in China. European standards, this kind of board is currently the most environmentally friendly on the market, but the price is more expensive. The price of blockboard (sandwich board) is more than 140 yuan / square meter; the price of decorative board is also more than 100 yuan / square meter; and the floor is more than 200 yuan / square meter.

2. See certification. If any plate is declared to be environmentally friendly, it must have the green building materials ten-ring certification mark of the State Environmental Protection Administration. This is the main criterion for measuring the scale, product quality and comprehensive strength of a customized furniture brand enterprise.

3. Read the report. Customized furniture requires businesses to provide test reports from authoritative institutions above the provincial level. It is worth noting that the inspection report must be issued by the quality inspection department of the place of sale. In addition, furniture must provide product instructions, which has only recently become mandatory.

Editor's summary: I have introduced here how to choose customized furniture sheets, and I hope it will be helpful to everyone. For more related knowledge, you can follow the information on this website.

What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount

If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.

Furniture sheet custom furniture sheet

Bedroom Furniture

Your bedroom isn`t just a place for sleeping, it`s your own private sanctuary where you watch movies, read the paper, or work on your laptop. With stylish new bedroom furniture, you can transform your bedroom into your very own oasis of peace and relaxation.

Bedroom Furniture,Wall Beds,King Size Beds,Queen Size Beds

HOPE IKEA , https://www.shenyangwood.com