Water, as an indispensable element of life, is very precious to human beings. Clean and healthy drinking water is the guarantee of life. Nowadays water shortage and pollution problems are increasingly serious. How to conveniently and simply obtain healthy drinking water outdoors is also a topic of concern. There is a solution to the problem. Therefore, the life kettle has emerged. In fact, before I had contact with the life straw, I felt that the design concept of this product was really good. The outdoor activities themselves must be meticulous, and too much drinking water will undoubtedly add a lot of weight, putting an extra burden on the outdoor trip. The local suction function of the drinking straws solves this problem very well, and now the life kettle of the life straw upgrade product has brought further convenience. It can be carried by water to ensure the water supply of the journey. First of all, take a look at the parameters of the life kettle: Product Name: LifeStraw® Go Life Kettle Filter membrane aperture: 0.2 micron Probation period of water: 1,000 liters/264 gallons Size: 235mm (9.3 inches) × 80mm (3 inches) Weight: 186g Capacity: 650ml Product features: No battery, no power supply, no BPA, no chemical composition, in line with the US EPA drinking water standards, all raw materials are in line with the FDA Food and Drug Hygiene Supervision Bureau standards, water filter materials tasteless: do not use iodine or iodine resin, etc. Chemical material Filtration Technology: Hollow Fiber Membrane Clear 99.9% of protozoa: Giardia lamblia ("beaver fever"), Cryptosporidium 99.9999% of bacteria can be removed: E. coli, Campylobacter, Vibrio cholerae, Pseudomonas aeruginosa, Shigella, Salmonella. Principle of Water Purification: LifeStraw® Go Life Kettle uses innovative Swiss water filtration technology, created by Seiko Korea, using innovative hollow fiber membranes with a pore size of only 0.2 μm. Thousands of tiny holes can be imagined. Only water can pass through and bacteria and parasites are blocked. The structure of the life kettle is very simple, cup body, lid, filter element. The lid of the cup has a certain amount of weight. The folded bottle mouth is picked up when it is drinking. When not in use, it is pressed down to prevent the sand and dust from invading. When the bottle mouth comes up, you can see a blue dot in the groove. This is the outlet hole of the bottle cap, which keeps the pressure inside and outside of the bottle when absorbing water. Otherwise, water is not sucked up. Bottle caps are tested with the lifestraw logo. The bottle is made of safe materials, does not contain BPA, and has a maximum capacity of 650 ML. It is not very large. This should be taken into account when it comes to daily and outdoor activities. Too big bottles occupy a large area and they are heavy and can affect activities. A moderate capacity will make the water not be consumed quickly, and it is not very occupied, and the weight is not too heavy. Does not affect activities too much. The bottle mouth is designed with a nylon belt and a metal buckle, which can be fixed on the portable bag for easy carrying. It is worth mentioning that the buckle is specifically noted: NOT FOR CLIMBING USE, can not be used as a quick-climbing carabiner. There are rubber rings around the inside of the cap to prevent water leakage. The most important part of the filter element is detachable. The joint between the filter element and the bottle cap is also sealed with a rubber ring to prevent unfiltered water from being consumed. Both ends of the filter element have a filter, and there are also parallel pores around the filter tube. Through the pores, the filter membrane inside the filter can be seen. This membrane adopts the advanced VESTERGAARD ​​microfiltration membrane technology, which can filter 99.9999% of the bacteria in the water (E. coli, etc.) and can filter 99.9% of the protozoa in water. Insects, Cryptosporidium, etc.) reduce turbidity and the filtered water meets US EPA drinking water standards. However, chemicals, salt water, heavy metals, and viruses cannot be filtered. This is a point to note, although the life kettle is very 牛逼, but it is still not omnipotent. LifeStraw GO Life Kettle can filter 1000 liters of water. Suppose an adult drinks 2 liters of water per day with the LifeStraw GO Life Kettle. The LifeStraw GO Kettle lives for at least 2 years; the LifeStraw GO Kettle uses a VESTERGAARD ​​hollow ultrafiltration membrane to filter and the water flow rate decreases as you pass through it until Can no longer drink water through it, means to reach its useful life. The non-removable and replaceable design of the filter cartridge allows the cartridge to be replaced with a new one when it reaches the end of its service life. Take some sample water in the pond and take it home to test some reagents. First pour the sample water previously taken in the pond into a small measuring cup, then pour the remaining sample into the life kettle for filtration and purification. It can be seen from the comparison that the water that was not filtered and purified before is yellow and has a lot of impurities, and the filtered water is transparent and free of impurities. Then use the pH value of the reagents to detect, according to the final color comparison, it will be found that the filtered water is more alkaline. The blue ink is used to represent the contaminated water. After being filtered by the life kettle, blue is absorbed and the water appears transparent. Then tap water and filtered tap water to test the water activity. Using active water reagents, you can know if the water is processed in the later stage, yellow is processed water, and red is the live water natural water. Contrast can be found that the filtered water is redder, indicating that some added substances in the tap water are filtered out by the filter element and the water quality is more natural. The method of use of the life kettle is also very simple, three steps to get: 1, filled with unfiltered water in the cup; 2, put on the lid, drinking filtered water through a straw; 3, each time after drinking water to screw Open the lid and blow it like a straw to blow the dirty water out of the filter. When you use the LifeStraw GO Life Kettle for the first time, it is recommended that you immerse the pipette in water for 30 seconds before using it. This will help the microfiltration membrane inside the pipette become moist, making it easier to filter water. If after use, the appropriate reverse air blowing is not performed, the hollow ultrafiltration membrane in the suction tube traps the bacteria that remain in the tube, so you do not have to worry about any bacteria passing through the ultrafiltration membrane. The LifeStraw GO life bottle effectively solves the problem of outdoor water intake. This not only provides convenience for outdoor activities, but also provides a safe drinking water guarantee in times of crisis to provide conditions for life in the event of natural disasters. So for such a product, I think it's not just outdoor, it should also have a place in the family first-aid kit. After all, its role is too great. Basil Oil,Chinese Herbal Oil,Evening Primrose Oil,Chinese Medicine Oil Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.zxnaturaloils.com
