The high temperature test temperature requirements for different fluoroplastics are as follows (recommended product YASELINE high and low temperature test chamber): Fluoroplastic: ETFE Temperature: 149±3°C Fluoroplastic: FEP Temperature: 149±3°C Fluoroplastic: PFA Temperature: 260 ± 3 ° C Fluoroplastic: PTFE Temperature: 260 ± 3 ° C Fluoroplastic: PVDF Temperature: 135±3°C Note: 1. The above various temperatures are the recommended temperatures for each type of fluoroplastic. Manufacturers can specify different temperature values ​​than the above requirements according to different materials, products and process conditions (such as modification of fluoroplastics). 2. The above temperature is tested based on non-corrosive conditions and no pressure. The high temperature resistance of the fluoroplastic may change under specific conditions. The temperature limit in the specific working conditions should be agreed between the user and the manufacturer, or the manufacturer should correct the test value according to the actual experience. For example, the fluoroplastic is lined by the adhesive, and the high temperature resistance of the adhesive should be considered. Conference Chair,Conference Chair Stackable,Conference Chair Wheels,Conference Chair Office Taihe Fangyuan Muye Co.,Ltd , https://www.fyofficefurniture.com