Maintenance of shaking incubator: 1. Accurately use and pay attention to the maintenance of the instrument so that it is in good working condition, which can extend the service life of the instrument. 2. During the continuous working period of the instrument, periodic inspections should be done every three months; check the fuses, control components and fastening screws, and whether there are water drops, dirt, etc. falling on the motor and control components. 3. The bearings of the transmission part have been filled with a proper amount of grease (No. 1 calcium-naki) before leaving the factory. The instrument should be filled with grease every six months during the continuous working period. / 3. 4. The instrument is often used, and natural wear is normal. After the instrument is used for one year, if abnormal noise is found in the motor and compressor; the bearing of the transmission part is worn, the belt is loose or cracked, and the electronic control component fails, the company will continue to provide quality services and assist in handling. 5. The compressor should avoid continuous starting. Sunshade Adjustable Umbrella With Base Sunshade Adjustable Umbrella With Base,Custom Patio Umbrella Canopy,Adjustable Sun Umbrellas,Adjustable Shade Umbrella Hebei Charlotte Enterprise Co., Ltd. , https://www.clshadesails.com