1. Power on: Insert the power plug of the unit into the power socket, press the power switch on the panel, and the switch indicator is on, indicating that the power is on. 2. Press the lighting switch on the panel, the switch indicator lights, and the internal lighting of the box is on. Press the light again to turn off. 3. Temperature controller menu operation: (1) In the instrument operation state, the upper main screen displays the measured value and the lower payment screen displays the set value. (2) If you want to change the setting value and press the SET button, the screen lock will be paid. Press the △, △, △ keys to set the desired temperature control value. After setting, press SET key again, then the instrument enters the newly set control program to run. (3) Set the upper limit alarm: Hold down the SET key for several seconds until the main screen displays RL1. When the pay screen blinks, press the △, △, △ keys to set the desired upper limit alarm value. Press the SET key to complete the setting. (4) Lower limit alarm setting: Press and hold the SET key for several seconds and wait until the main screen displays RL1. Press the SET key again to display the RL2 on the main screen. The pay screen flashes. Press the key to set the lower limit alarm value. Press the SET key again to complete the setting. (5) After setting the upper and lower limit alarms, press and hold SET for several seconds until the main screen displays the measured values. After the set values ​​are displayed on the screen, the instrument operation is completed. The machine enters normal operation. 4. The incubator should always be kept clean. Do not use any chemicals such as acid, chemical dilution, gasoline, benzene, etc. to clean any parts inside the box. 5. In case of failure, contact the manufacturer in time within the three-pack period (within one year). 6. In the course of use, when a sudden power failure is encountered, the power plug should be unplugged and turned on for at least 5 minutes. 7. Before using the machine for the official use, clear the operating procedures before using it. 8. The enclosure must be effectively grounded to ensure safe use. 9. Cleaning: Clean the inside of the incubator every month, disinfect it with disinfectant, wipe the outside surface with a clean, slightly damp rag. 10. Maintenance and Maintenance: Check the operation of the compressor every week to ensure that the equipment is in good lubrication condition. 11. Maintenance of the instrument: Have the manufacturer's maintenance personnel perform the repair. 12. Microbiological inspectors check the operation of the instrument on the morning and afternoon of each working day and fill out the usage records. luxury console table,console table modern luxury,marble table Kumusi (Dongguan) Furniture Co., Ltd. , https://www.coombesfurniture.com
Shanghai Xinzhuang Instrument Co., Ltd. develops the LNB brand mold incubator, which is energy-saving and environmentally friendly and leads the domestic market. Professional manufacturing is more secure and affordable