When the machine is shut down after finishing work, or when the order is replaced, the ink path system should be cleaned. One is to prevent the ink ink from drying up and cause the anilox roller and the plate to be scrapped. The second is to completely remove the residual ink in the ink path to avoid Affect the color of the next order. In the maintenance of anilox rolls, some users are equipped with a powder cleaning machine or other cleaning equipment, which can perform a large degree of cleaning of the mesh holes. This cleaning is actually mainly a physical crushing process, which can remove many The dried ink remains a major overhaul of the anilox roller. The cleaning of the anilox roller is more important than the overhaul. When changing the order or closing the work, it is necessary to perform a more thorough rinse with water flow (or with an appropriate cleaning solution). At no time can the ink be dried on the anilox roller. Otherwise, even if there is a modern cleaning method, it is impossible to completely avoid the scrapping of the anilox roller or the deterioration of the ink supply performance. Take the Dniton press as an example, it has a fully automatic ink cleaning function, and a cleaning cycle is only a few minutes. According to actual needs, the operator can control the temperature and time of the cleaning water. Before cleaning, the electronic ink pump can recover more than 99.9% of the ink in the ink chamber, and then the high-pressure water flow cleans the ink chamber and automatically rinses. The energy-saving and ink-saving rapid cleaning system makes the order changing process in carton production particularly convenient, fast, and economical, which fully highlights the advantages of energy-saving and fast and flexible production of ink-flexo carton production. Medical Equipment Package Bag,Ultraviolet Disinfection Take-Out Bag,Household Medical Supplies Storage Bag,Portable Uv Disinfection Bag Dongguan Mingpin Travel Goods Co., Ltd. , https://www.mingpinsuitcase.com