Northeastern Network May 22 news reporter learned from the Municipal Standardization Institute, " General Technical Conditions for Children's Furniture " will be officially implemented on August 1, the new standard has specific requirements for the harmful content and edge shape of children's furniture . According to Wang Jing, director of the Standards and Documentation Center of the Municipal Standardization Research Institute, the General Technical Conditions for Children's Furniture is a national mandatory standard. This standard applies to furniture products designed or intended for use by children between the ages of 3 and 14. In "Architectural Safety" requirements: the product should not be dangerously sharp edges and tips, and the edges and edges should be rounded or chamfered. The contactable dangerous outer corner of the product at a height below 1600mm from the ground shall be rounded, and the rounding radius shall not be less than 10mm, or the inverted arc length shall not be less than 15mm. Mould Stries,Silicon Baking Mould,Silicone Bakeware Mold,Bakeware Mold Changshu Xinneng Silicone Products Co., Ltd. , https://www.xnsilicone.com