Many people often comfort themselves when they buy valuables with big bleeding. Nowadays, in the face of Da Vinci's high-priced fake furniture, this famous consumer saying suddenly collapsed! In the face of such a terrible scam, are you worried about the furniture brand? Confidence in solid wood furniture is no longer? In the face of expensive solid wood furniture, how should netizens identify the authenticity of solid wood, and what details should be paid attention to when purchasing solid wood furniture? Xiaobian will take you to uncover the veil behind the solid wood furniture. Usually, solid wood furniture refers to furniture whose frame is solid wood. For example, countertops, door panels, side panels, partitions, bottom panels, etc. may be artificial panels. Consumers need special attention! Pure solid wood furniture means that all materials are natural logs that have not been reworked, and no furniture made of wood-based panels is used. Solid wood furniture, including the table top, the door panel of the wardrobe, and the side panels are all made of pure solid wood. Pure solid wood furniture has high requirements on craftsmanship and materials. Solid wood selection, drying, finger jointing, seaming and other requirements are very strict. If any process is not tight, small cracking, loose joints, etc., the whole set of furniture is deformed, so that it can not be used. Classification of solid wood furniture: 1, pure (full) solid wood furniture: all the furniture is solid wood, including the desktop, wardrobe door panels, side panels, etc. are made of pure solid wood, do not use any other form of wood-based panels. Pure solid wood furniture has high requirements on craftsmanship and materials. Solid wood selection, drying, finger jointing, seaming and other requirements are very strict. If any process is not tight, small is prone to cracking, loose joints, etc., and the whole set of furniture will be deformed, so that it can not be used. Hardwood Chinese furniture is a typical example of such furniture. 2, board and wood combined furniture: from the appearance of solid wood furniture, the natural texture, feel and color of wood are exactly the same as solid wood furniture, but in fact the furniture mixed with solid wood and wood-based panels, that is, the frame uses solid wood, side panels, bottom Wood-based panels decorated with surfaces, tops, shelves, etc. Most of the solid wood furniture currently on the market is made of wood and wood. Buy furniture first to see if it is solid wood Most of the solid wood furniture on the market today is on the high price. As a big item for household decoration expenditure, we must carefully distinguish the authenticity of solid wood furniture, and do not let the Da Vinci furniture cost incident happen to me. If you buy solid wood furniture, you can use the "one look, two smells, three questions, and then look at the product description". Look at the appearance first to determine if it is solid wood. One of the mysteries of judging whether it is solid wood furniture is: wood grain and crusting, mainly watching the door panel and side panels. Tips: crusting, wood grain and cross section. Scarred: Look at the location of the scared side, and then find the corresponding pattern on the other side. Wood grain: The appearance looks like a pattern, so the position of the pattern change corresponds to the corresponding pattern on the back of the cabinet door. If the correspondence is very good, it is pure solid wood. Section: The color of the section is deeper than the panel, and it can be seen that it is made of whole piece of wood. Second, judge the tree species. This is a factor that directly affects price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the valuable mahogany furniture mainly uses rosewood, wenge, rosewood. The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing trees. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap. From the cheapest pine, eucalyptus, to expensive mahogany, the price difference is dozens of times. Therefore, do not consider the tree species because it is solid wood. After all, solid wood like pine, in addition to environmental protection, performance is much worse than the artificial board. Third, observe the wood. Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell. Fourth, pay attention to the details when buying. The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails. Several major defects in solid wood: cracking, crusting, insect eyes, mildew Cracking: Naturally can't buy. Scarred: If there is a scar on the front, the same position on the back also has this knot. This knot is basically a dead knot. It takes a long time and will fall off. Therefore, furniture with such defects cannot be bought. Insect eye: Although many furniture are said to have been dried and degreased, you think that China is so big, there are so many furniture factories, the state management is so weak, and the credibility must be at least 50% off. In addition to those Western-style solid wood furniture, deliberately engraved on the insect eye, the other should not buy. Mildew: It is the fact that the wood is green and has water marks. Although the sales will tell you that it has been dried, no problem. But you think about it, after the moldy bread has been reprocessed, will you still eat it? The performance of moldy wood is not the same as before. Try the "Inverted" test Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges, and the slats are fastened to the crosspieces? There are no excess glue and filler in the seams. In the market, wood furniture is still the mainstream, especially those who buy solid wood furniture. Because consumers' low awareness of wood and the ambiguity of the product quality labeling caused serious information asymmetry, the purchase of furniture was deceived. All solid wood furniture: high requirements on material technology All solid wood furniture stipulates that all wood parts are made of solid wood sawn timber or solid wood panels. Like everyone's familiar mahogany furniture, is a kind of solid wood furniture, also known as hardwood furniture, the material generally has red sandalwood, huanghuali, chicken wing wood and rosewood, etc., the price is high, has a collection value. The other is cork furniture, a wide variety, such as maple, oak, eucalyptus, ash, etc., the price is much lower than mahogany furniture, can be accepted by most people. There are also some solid wood furniture made of miscellaneous wood on the market, mostly for low-end and mid-end products, and the price may be cheaper than the panel furniture. In addition to mahogany furniture, in general, the same grade of solid wood furniture should be higher than the price of the other two types of solid wood furniture. Advantages: natural environmental protection All solid wood furniture is the oldest type of furniture. Now some of the larger brands of classical furniture and original ecological furniture use solid wood, such as Armani, Gaoju and Pu Fengtang. The popularity of all-solid wood furniture caters to people's return to nature, and its originality makes many people unable to give up. If it is a good work of a good designer, even the furniture of modern design has the value of use and collection. Disadvantages: body and body All solid wood furniture has high requirements on craftsmanship and materials. The most fatal flaw is that the change of water content makes it easy to deform, and the requirements from material selection, drying and seaming are very strict. There are also many requirements when used, such as not allowing sunlight, not too cold or too hot, too dry and humid environment is not suitable for solid wood furniture. If you do not pay attention to the use, even the qualified solid wood furniture products sometimes deform and crack. In addition, the combination of components of solid wood furniture is usually made of enamel structure and adhesive, and the finished product is generally not removable, which is inconvenient when moving. Solid wood furniture: the most easily overlooked furniture Before the implementation of the "General Technical Conditions for Wood Furniture", many conscience manufacturers called solid wood furniture to make wood and wood combined furniture. It required the substrate to be made of solid wood sawn timber or solid wood panels, and the surface was not covered. At present, board and wood combined furniture occupy a major share of the mid- to high-end market. Generally speaking, the frame structure of the table top, the table (chair) legs, the door frame and the like are made of solid wood, and the side panels, the bottom, the top, the partition and the like are made of artificial boards (the density board, the particle board, etc. are all the wood-based boards). But now, businesses can be called the solid wood furniture. Some people think that the new standard is easier for consumers to be fooled. In the market, most merchants pretend to be pure solid wood furniture by combining wood and wood. Therefore, before buying, you must first ask whether the solid wood furniture in the picture is pure solid wood, or the combination of wood and wood, or solid wood veneer. Need to remind consumers, now if someone tells you that a piece of furniture is "board wood" combined with furniture, then you have to think about it, where is the board, where is the wood, because now, it can only be assigned to the integrated wood The scope of furniture, do not pay attention to people to fool. Advantages: Advantages and advantages The combination of wood and wood furniture should be the most advantageous furniture in solid wood furniture, which saves wood and reduces costs. The most important thing is that it solves the fatal injury of all-solid wood furniture easily deformed, and has the flexibility of the panel furniture. It can be said that it takes into account the advantages of all solid wood furniture and panel furniture, and avoids their shortcomings. Disadvantages: not too expensive Although taking into account the advantages of all solid wood furniture and panel furniture, there are also many inherent defects. For example, it is not as colorful as the plate furniture, and it is not as expensive as the solid wood furniture. It is worth collecting.
Cleaning dust is mainly used to sweep the dust of objects, and can be used together with the telescopic rod. However, it cannot be used to sweep the ground or water areas. Rinse well after use and keep dry.
1. Fuzzy brush head:
microfiber material fuzzy brush head, strong adsorption, dust will not fly when cleaning
comfortable handle, non-slip process. Strong and durable, anti aging, longer life
Cleaning dust is used to sweep the dust of objects. It can be used together with the telescopic rod. Do not use to sweep the floor and water places, clean after use, and keep dry. Household Cleaning Magic Microfiber Duster,Cleaning Brush,Radiator Duster,Car Dust Cleaner NINGBO JENNY IMPORT & EXPORT CO.,LTD , https://www.jenny-china.com
2. Handle process: