Model NO.: MZH-S
Packaging Material Mechanical Properties: Flexible Container Sealing
Material Type: Liquid
Voltage: AC 220V; 50Hz
Power: 1.5kw
Place of Origin: Guangzhou
Applied Bottle Height: 40X330mm
Air Compressure: 0.2-0.6kgf/Cm
Cap Diameter: 16-55mm
Capacity: 20-50PCS/Min
Trademark: Miziho
Transport Package: Plywood Package Box
Specification: 75mm*400mm*600mm
Origin: China
HS Code: 8422301090
Semi auto Screw Capping Machine sealing machine
Semi Auto Screw Capping Machine Sealing Machine
 

Main technical parameters:
  1. Power Voltage:AC220/50Hz
  2. Cap Diameter:¢16-¢55MM
  3. Capping speed:20-50PCS/min
  4. Applied bottle height:40-330MM
  5. Air compressure:0.2-0.6Kgf/cm
  6. Weight:25Kg
  7. Size:48(L)X40(W)X60(H)CM
Operation Precautions:
  1. Before using, add ISOVG32 pneumatic gas oil or equivalent oil on the gas source processor.
  2. To adjust the capping head according to the bottle height.
  3. To adjust the cap size, according to the bottle cap, two sides adjust at the same time.
  4. To adjust the position withstand, let the bottle mouth under the center of the capping head.
  5. To adjust the Torque regulator meet capping strength.
  6. Switch on the power, open the hand sliding switch for gas.
  7. Control valve operation, first to pull up the adjustment switch can adjust the air pressure.
  8. Manual operation, to connect the food stamp switch under the electric box. Note: To be sure the manual/ automatic button on the red light position.
Trouble treatment method
 Machine cannot open, check if it is supply AC220V power or power is damage, transformer burn off, change a  new one.
  1. Cannot work automatic, manual/automatic doesn't switch, or not open start button, or the wire board in trouble, electromagnetic valve cause it.
  2. Motor does not move, torque adjustment switch broken or transformer, capping motor, capping motor start button in trouble.  
  3. Capping lose or not tight, adjust the torque regulator..
  4. Capping motor does not move, check if the power, or electromagnetic valve, wire board in trouble.
  5. Cap press cylinder does not move, check if the power, or electromagnetic valve, wire board in trouble.Semi Auto Screw Capping Machine Sealing MachineSystem maintenance
  6. Before or after opening the machine, keep the machine inside and outside clean, to make sure the machine normal movement.
  7. In the morning and afternoon, check all screw of the machine, sure no loose, if find, tightening it with tool.
  8. Keep other products away from the machine, to avoid stop the machine move.
  9. Out of work time, turn off the power to avoid other trouble.
     Semi Auto Screw Capping Machine Sealing Machine
    Semi Auto Screw Capping Machine Sealing Machine
    Semi Auto Screw Capping Machine Sealing Machine
    Semi Auto Screw Capping Machine Sealing Machine

H Series Seiko Printer

Infiniti Printer,Wide Format Printer,Large Format Printer

Hongkong Liyu Technology Co., Ltd. , http://www.chprinterparts.com