With the improvement of the corrugated paperboard industry globally, corrugated paperboard machinery is changing to fast, high-quality performance. Among them, the splicer in the corrugated board production line is also increasingly being reused by the carton factory. With the advancement of other supporting technologies, the paper-making technology is constantly being updated and improved. It will provide more efficient solutions for the global paper-receiving system.

Humanized control system

Meishang Magui International Co., Ltd.: Artificial Intelligence Design

Magui Digital splicer provides functions and high-speed excellent performance for web tension control. It uses artificial intelligence design structure. The splicer computer terminal with digital tension control and other reliable operating information can be controlled by the operator and set to optimally control the parameters of the web tension splicer.

Spain MTORRES Group: Constant web tension control

MTORRES CTS series splicer is equipped with a set of constant web tension control system at the entrance of the splicer, which can ensure the uniform and constant tension of the paper web during the whole work process of the splicing, thus completing the high-speed splicing work. . Tension control systems use pneumatic or electronic controls. The length of the side mechanical frame is from 3950 mm to 5600 mm. The splicer is also equipped with a touch control screen that can display faults in different locations on the machine and provides a variety of logic programming functions.


American Magui International Co., Ltd.: Precise roll breaks and dynamic tension control

Magui Digital splicer provides the function of easy control of the web tension and high-speed excellent performance. It uses the artificial intelligence design structure and can calculate the diameter of the web to determine the break point of the web and the tension control of the web. Magui's series of digital paper feeders can meet the needs of all related products. The feature of automatic control of the web is that it has an accurate control function function table. This table can track all operation records and inventory records. The automatic control of the web includes The receiving and operating signals of the web, during the change of the web, the required splicing machine will be set in the same area to avoid the production of waste products. There are three types of paper-feeding modes: (1) No paper-to-sheet connection is observed with "light" eyes; (2) Paper size is set by setting the diameter of the web, and (3) The operator observes the operation of receiving the paper when the paper needs to be fed.

Spain MTORRES Group: High Speed, Durability, Reliability

The MTORRES CTS series splicer has three different machine models, which can be upgraded very easily for the carton manufacturer to increase production speed and performance. The system can quickly adopt multiple methods to complete the pick-up work according to different paper web materials. The web tension control system can quickly compensate for web tension changes. The machine also allows single-layer, double-layer, or even three-layer stacking.

The startup of the entire splicing program has been fully automated, and the splicing program can be started on the basis of pre-set data through the touch control screen, and when a "photosynthetic" system is used to determine the start of the splicing process, a force is provided. The function of the option. In the unlikely event that the web breaks or when the web exits the core, the webbing action can be automatically restarted.

This type of splicer increases the reliability of running low basis weight paper, and can quickly and effectively complete the splicing preparation work, which is very suitable for the operator's operation. At the time of splicing, the process of overlapping or sequential connection of new and old papers can be used according to production requirements. The use of a vacuum adsorption system completes the control of the web. Depending on the machine model, the control system uses relay logic or a programmable control logic system. And the carton factory can use the modem for on-site communication or remote supervision.

All models of MTORRES's splicer are equipped with a touch control screen that can display faults in different positions of the machine and provide a variety of logical programming functions, such as: the parameters of the original paper roll, the adjustment of the splicer, and the splicing The length of the counter, brake control, and fault alarm prompts. All of this allows the operator to push a few buttons and enter some old numbers to easily control the normal operation of the entire machine. The unit of measurement of the touch control screen is the universal metric.


Zheyan Machinery Co., Ltd.: Fast and Stable to Meet High Speed ​​Production Demands

Tetsuhiko automatic splicer inspection can meet the needs of small orders, and the fitting gap is designed to be adjustable. It does not cause paper break due to edge break, and the stability of the automatic control system is good, especially when the paper is received. The inhibition tension of the new paper roll can be accurately grasped so as not to break the paper or form loose paper. The mechanical design has a faster actuation function and can meet the needs of high-speed production and is equipped with a pressure accumulator, so that the pneumatic cylinder is The fitting and cutting action is very precise, the distance between the paper cutting tool and the paper head is short (5 cm), and the waste of the base paper is reduced. Tension control circuit board is modular design, easy to detect and replace, reduce customer maintenance costs. Automated electronic control reduces the burden and omissions of personnel, making your production stable and reducing waste and downtime. The swinging design of the splicing trolley provides ideal head space and easy access to the paper. When unilaterally handling the paper ends, the individual trolleys can be moved to reduce the tension changes caused by the weight of the base paper and the distance, so that the quality of the cardboard is more stable.


Perfect success rate

UMG Magui International Co., Ltd.: World's Top Paper-making Technology

Ma Gui digital splicer speed is 225m/min ~ 400m/min, in the roll of the automatic control process, as long as the paper tension reaches a certain range, the splicer success rate will reach 99.5%.

Spanish MTORRES Group: Standing on top of technology

The MTORRES CTS series splicer retains the traditional mechanical structure while using the latest electronic technology, making this series of splicing machines high performance, high reliability and low maintenance cost. Three different types of machines have different production speeds ranging from 280-600 m/min, and can be flexibly configured according to different production requirements. The success rate of paper receiving reached 99.8%.


Source: Carton Special Issue

Casual Shorts Pants

High Waisted Butt Lifting Pants,Women High Waist Biker Shorts,Drawstring Athletic Track Shorts,Yoga Shorts Leggings

Hun Yuan Ya Lian Wan Jia Dian Zi Shang Wu You Xian Ze Ren Gong Si , https://www.ylwjastragalus.com