[ Chinese wardrobe network ] material class Look panel: solid wood particle board better breathability stability [Course points: According to the scale request, the thickness of the wardrobe layer should be 18 mm, and the thickness of the broken board should reach 25 mm. This is like the fact that a house must have a load-bearing wall, and it can be constructed to build a firm and stable house. 】 The first place that the closet sees is the panel. The panel is divided into a substrate and a face material. In terms of the substrate, the main products on the market are classified into a medium density board and a solid wood particle board. The stability of the solid wood particle board in the two materials is relatively high, the density of the medium density board is relatively thin, and the nail holding force is relatively weak, that is, if the hanging rod of the hanging clothes is long, it is relatively easy to loose. Advocating consumers to use solid wood particle board, because the solid wood particle board is made by pressing wood into pieces. The crumbs are like tea leaves in cross section, and the medium density board is to turn wood into crushed pieces. In comparison with the two, the permeability and moisture resistance of the solid wood particle board are better. Most of the panels now use double-panel panels. If the quality of the products is not good, the panels will turn yellow under the sunlight. The average consumer can't see the difference with the naked eye. The best way is still to identify the brand. As with other products, the thickness of the panel of the wardrobe must also meet certain standards. According to the standard requirements, the thickness of the wardrobe laminate should be 18 mm, and the thickness of the vertical panel should be 25 mm. This is like having a load-bearing wall. In order to build a strong and stable house. Look at the door frame: whether the two doors have a "dust strip" The material and singer of the sliding door frame is an important embodiment of the wardrobe door. There are two main types of carbon steel and aluminum in the door frame market. Carbon steel is easy to rust, and the rear hanging door wheel will be bare. At present, aluminum is the mainstream, aluminum is aluminum-magnesium alloy, aluminum-titanium alloy, etc., and titanium-magnesium alloy and other materials are better. Consumers should ask clearly when purchasing, the brand wardrobe will also add a soft "anti-collision strip" on the door frame, so that the door pulls silently, and the "dust-proof strip" will be added to the gap of the sliding door. Even if the work is well-conceived next to the two doors, there will be many millimeters of gaps, and the dust-proof strip is one of the manifestations of quality service. See accessories: shock absorbers reduce vibration during sliding In addition to pulleys, frames, etc., the purchase of sliding doors should be negligent. The shock-absorbing installation can reduce the vibration of the door during sliding, and ensure that the sliding door is still stable and smooth on the uneven ground; the height adjustment system can shorten the gap between the sliding door and the ground; the dust-proof brush is important in the two doors. Between the lap joints, the good quality brush is durable, and can avoid the damage caused by the long-term collision between the door and the wall; if the surface of the door is made of glass, it depends on whether the joint between the glass and the metal frame has A rubber strip that acts as a fix to ensure that the glass does not crack due to shock. Look at the glass: not "explosion-proof glass" will not negotiate Glass has also attracted the attention of consumers because it has spread to safety issues. There are two types of glass, one is general glass and the other is explosion-proof glass. If the wardrobe door has a glass design, the consumer must buy a wardrobe with an explosion-proof glass device. The so-called explosion-proof glass is to add an explosion-proof membrane inside the glass. Even if it is impacted by external force, the glass will not crack everywhere, and a glass backing is added to the reverse side of the glass. "The effect is that if the glass is damaged by strong external force, it will not break into sharp fragments and hurt people." Look at the service: see if its accessories can be equipped For consumers, looking at the service of the product is still the most intuitive measure. First of all, ask if the accessories are possible. When ordering products, push-pull mirrors, lattice racks, pants racks, pull baskets, and L-frames, whether these accessories can be supplied as a whole, this is the main manifestation of strength and service. Secondly, see if it chooses green environmental protection materials. The simple way is to open the door, open the drawer and have a look, and smell whether it has a pungent taste. A truly strong manufacturer will promise a lifetime warranty to the consumer. Price class Don't be squandered by the "fancy" [Course points: Although different types of products have different pricing methods, the final price difference is not significant. Consumers want to compare the end result of each pricing method. 】 After all, renovation is also a process of accounting. The price is of course the most concerned issue for consumers. Comparing the price of the whole wardrobe with the finished wardrobe and the customized wardrobe, at present, the price of the finished panel furniture on the market road is calculated by the piece, the price of a set of four-door wardrobe is more than 2,000 yuan, but the wardrobe cabinet is often very shallow, built-in The fixed rack can not be exchanged, and the storage capacity is limited. If the overall wardrobe is made, the general price is calculated based on the practical area of ​​the board, and the price is determined by the design plan of the cabinet and the amount of accessories. The price of the whole wardrobe will be included in all materials, calculated in square meters, and based on the amount of materials used, usually the price per square meter is about 1,000 yuan. In fact, these different types of products are different in pricing methods, but the ultimate price difference is not obvious. Consumers want to compare the end result of each pricing method. Craft class Sliding doors are most afraid of "dislocation" [Course points: Sliding doors need to be easy to push and pull, no vibration, no noise. The sliding rails have to bear large bearing capacity, and are resistant to pressure and wear, and most of them are currently made of titanium-magnesium alloy rails. Sliding doors generally require more than 60,000 times of push and pull, and branded wardrobes can reach more than 100,000 times. 】 Louver door style is simple and popular The format and material of the sliding door are various. The reporter saw in the market that the materials currently used in the market are wooden boards and glass. The texture of the board is more natural and simple, suitable for style or Chinese style. The tempered glass or mirrored door panels are stylish and suitable for the style of the ancient style. The appliqué or leather-covered door panel is more noble and elegant, suitable for luxurious and extravagant decoration style. The sliding door is mostly in the shape of fake louver, and the style of the louver door is simple and fashionable, which is more popular than the market. At present, the price of sliding door in the market is calculated on the basis of square meters, the average price is about 1000 yuan, the price of the first-line brand is between 1000~1500 yuan, and the price of the general brand is between 600~900 yuan. Slide rail sliding door can generally push and pull 60,000 times The most important feature of the wardrobe door is that it is convenient to switch. Even if the door panel material is not environmentally friendly, it will not affect its performance. However, if there is a problem with the sliding rail of the sliding door, it will seriously affect the normal use. If the track quality is poor for a long time It is easy to see the door panel coming out of the track or pushing and pulling hard, just like human joint dislocation or arthritis, normal behavior will be greatly trapped. Sliding doors are easy to push and pull, no vibration, no noise. The sliding rails have to bear large bearing capacity, and are resistant to pressure and wear, and most of them are currently made of titanium-magnesium alloy rails. Normally, the sliding door can push and pull more than 60,000 times, and the brand wardrobe can reach more than 100,000 times. The material of the pulley is also very important. At present, there are mainly three kinds of plastic pulleys, metal pulleys and glass fiber pulleys. The plastic pulley has a firm texture, but it will be sturdy and hard to be used for a long time. The metal pulley has great strength, but noise occurs when it comes into contact with the track; the glass fiber has good toughness, wear resistance and smooth sliding. In addition, good pulleys are often designed with two anti-jump devices to ensure that the sliding door does not derail when it slides. Be sure to choose carefully. Many people think that the lighter and better the sliding door is when sliding. In fact, the sliding door should have the weight of a certain door when sliding, and there is no vibration during sliding and smooth, smooth and smooth. If there is a feeling of lightness, it will not be too smooth. The tight combination of the pulley and the slide rail determines the smoothness of the sliding of the sliding door, so the sliding door can be gently shaken during screening. If the degree of the door shaking is smaller, the stability is better. When shaking, pay attention to the upper pulley and the upper rail. The gap of the good quality sliding door is almost zero, so that it will not feel the vibration when it slides, and it will be smooth and smooth. Design class Wardrobe placement considerations home appliance wiring [Course points: the design of a reasonable overall wardrobe placement status, to take into account the rest of the home appliances, wire network, reasonable wiring and so on. Based on the overall style and the main melody color matching and mutual compliance criteria, the color of the cabinet of the whole wardrobe, the style of the wardrobe sliding door and the color of the door panel should be selected in advance to make it harmonious with the home environment. 】 Designed to have a sense of integrity The overall wardrobe is very conducive to a modern home life. However, the overall wardrobe must have a reasonable design, and the ability to reflect the overall sense of the design can be more applicable and convenient. The designer of the company's peak decoration company introduced the structure of the bedroom to a large extent to determine the width of the overall wardrobe and the design of the internal space structure of the cabinet. Considering the different needs of the space and the owner, the interior of the cabinet must have different adjustments. The whole wardrobe is a large piece of furniture, and its placement directly affects the overall layout of the bedroom. Design a reasonable overall wardrobe location, taking into account the reasonable wiring of other home appliances, wire networks, and so on. Based on the principle of the overall style of the bedroom and the main melody color, the color of the cabinet of the whole wardrobe, the style of the wardrobe sliding door, the color of the door panel and the color of the floor, bed frame, bed cover, curtains, etc. Style reconciliation. For the decoration of most of the current living room, it adapts to the modular and integrated decoration trend. The whole wardrobe, the whole study room, the shoe cabinet, the locker and even the TV cabinet are tailor-made, and it is necessary to prevent the accident before it can achieve better decoration. as a result of. Big brands are more secure than small ones In the current home improvement company, many home improvement companies have wooden works, and at the beginning of the design, the owner made some lockers or storage cabinets in the suitable space. Scattered carpentry will also make some furniture according to the requirements of consumers. It is understood that the wardrobes made by custom-made or custom-made furniture are usually hand-made for woodwork, and the materials are mostly large core plates and splints. In order to save money, the quality of the large core plates and plywood used is very poor, and it is difficult to meet environmental standards. All the parts of the cabinet are made by hand, so the cabinets are mostly nailed, and the locks are often incorrect. In this way, the time is long, the nails are easily loosened, and nail holes appear. The edge of the cabinet is also hand-sealed, and the tightness and fineness will be poor. The professional overall wardrobe will be more demanding on materials. At present, the overall wardrobe on the market is mostly made of high-density fiberboard and double-sided melamine finish. The production of the assembly line and the sealing of the whole self-container ensure the tightness and refinement of the whole wardrobe. The scope of production makes these products more mastery than the quality of hand-made products. If the quality is problematic, there is a more powerful after-sales service. . The whole wardrobe can be moved at home Although the naked eye is invisible, the uneven wall of the building is very deformed. Before the construction of the home improvement company or the private custom-made wardrobe, the wall will usually be “leveledâ€, and then the cabinet and the wall will be tightly combined to achieve seamless. On the surface, it seems that the cabinet is integrated with the wall and the overall view is elegant. In fact, this will cause the cabinet to be difficult to move and fix the problem. Professional custom-made wardrobes do not have such a close union with the wall. The wall and the cabinet are connected by a closing plate, which is more compact and helps to block dust. The whole wardrobe is handed over to the ceiling, plaster line, and skirting, and the connection with the wall is more strict. At the same time, the wardrobe is easy to move and easy to disassemble. Even if moving or moving, the whole wardrobe can be moved at home. Nursing class Daily cleaning with a dry cotton rag [Course points: The frame of the wardrobe sliding door is mostly made of metal material, and it should be wiped with a dry cotton rag for daily cleaning. If you need to clean the water, you should wring the rag to prevent the metal from being oxidized. 】 The sliding door of the closet also needs the careful care and support of the owner, and it can serve you for a long time. The frame of the sliding door is mostly made of metal material, and it should be wiped with a dry cotton rag for daily cleaning. If you need to clean with water, you should wring the rag to prevent oxidation of the metal surface. Most of the sliding door panels are glass or high-density panels. For glass door panels, always wipe with a dry rag; or scrub with a diluted neutral detergent or glass-specific detergent, then dry with a dry cotton, lint-free cloth. For high-density boards, wipe them with a dry cotton rag. It is not advisable to scrub with a separate detergent. If the water is clean, be careful to dry it with a dry cotton rag. The sliding rails of the sliding door tend to accumulate dust, which will affect the sliding, thus affecting the service life of the sliding door. Therefore, the dust in the track should be cleaned regularly with a vacuum cleaner on time, cleaned with a rag on the corners, and then wiped with a lint-free cotton cloth. Wipe dry.
GAKO Aquatics specialize in manufacturing and designing led aquarium Fish Tank lights. Till now, we have a variety of led aquarium lights, such as the led light for freshwater( led fish tank light with extendable mounting legs, led air bubble light, submersible fish tank light, and small clip-on aquarium light), the led light for coral reef growth and the led lights for low-light level plants and planted aquariums.
LED aquarium lights for freshwater
LED lights for coral reef growth
LED lights for planted aquariums
Aquarium Led Light,Fish Tank Light,Plants Led Aquarium Light,Led Coral Reef Light Shenzhen GAKO Aquatics Products Co., Ltd , https://www.gako-aquarium.com
