[ Chinese wardrobe net ] When buying a custom closet , we need to measure the custom closet, so how to measure the custom closet? The following website will tell you about the custom wardrobe measurement method.

First, the custom wardrobe preparation before the measurement

1, measuring tools

The main measuring tool 5M-7.5M steel tape measure

Auxiliary measuring tool 10M-20M leather tape measure

Essential tools for paper, drawing pens and other recording data

2. It is clear that the customer has completed all the decoration of the wardrobe installation area, including the floor, wall, ceiling, etc.

Second, custom wardrobe measurement methods

1, three-sided measurement

The "three-sided measurement method" is a plane measurement method, a facade measurement method, and a facade side view measurement method.

In the measurement process, you need to draw a sketch of the plane and elevation layout with a paper and pen, and then measure the size. The higher the accuracy of the measurement size, the better, and the error is not more than 3mm.

The measured data is recorded on the sketch and clearly marked. There must be no missing or unmeasured areas. Multi-point measurement is required for the measurement.

2, sliding door hole size measurement method

The dimensions of the sliding door opening should be accurate plus or minus 2mm. Only the correct size can produce the sliding door of the right size, in order to make the production more correct, the installation is more convenient, and avoid unnecessary loss.

The door hole size measurement method uses a multi-point measurement method such as height H1, H2, H3, width W1, W2 to measure the accurate size of the sliding door opening.

3, multi-point measurement method

The multi-point measurement method, also known as the three-point measurement method, obtains accurate data through multi-point measurement, and measures the room size without a doubt.

Third, custom wardrobe measurement considerations

Nowadays, the custom-made wardrobe is a kind of finished furniture that is different from everyone's thought. It is an industry that is used to make up for the waste space of the whole furniture and the lack of personality and the pollution of the room on the construction site and the shortcomings of the cabinet. The product is different from the finished furniture in the process. The process of customizing the wardrobe is simple: the door-to-door measurement design---the store chooses the style and color to sign the contract----factory order production ----Storage inspection----Home installation----After-sales service

The on-site measurement is generally two times. The initial test is usually about one week after the decoration company enters the construction site. The purpose is to propose the installation position of the wardrobe or the cloakroom and how to solve the problems such as the plaster line or the kick line with the construction party. Good communication, avoiding problems found in the later stage, so that it can't make up for it, which makes the decoration regret. In addition, the designer can first design the draft and let the customer have a simple understanding, which can save the time for confirming the contract later, and also have a sum. The time the family fully considered.

After the initial test, it is the specific style of the sliding door and the color of the wardrobe. It is because some measurement methods or sizes are different according to different styles. The selected colors and styles are generally based on the style or Choosing the color of the product, or selecting other main products according to the style of the wardrobe or sliding door.

Depending on the location or function of the wardrobe, you can determine the time for the door and the precise measurement. If your wardrobe is leaning against the wall or not moving in the future, such as the cloakroom, you can ask the manufacturer after leveling the floor cement. The door is measured; if your wardrobe is on one side against the wall or you want to move the position later, such as bookcases, shoe cabinets, TV cabinets, etc., it is best to ask the manufacturer to measure after the floor or floor tiles are laid, but please rest assured, generally complicated The selection process and the steps to confirm the cabinet layout have been completed, and it will not delay the time. The general manufacturer's custom cycle is about 10 days, and it can be used directly after loading. It will not delay everyone's stay time.

Bamboo Chair

Bamboo Chair,Bamboo Dining Chairs,Bamboo Armchair,Bamboo Table And Chairs

Foshan Shunde Zhili Furniture Company , https://www.zhilioutdoor.com