[ Chinese wardrobe network ] Many people are afraid of custom-made solid wood wardrobes to buy inferior quality, do not know how to identify custom solid wood wardrobe? The following website will tell you how to customize the solid wood wardrobe identification skills.

1, look at the surface texture and knot

The solid wood wardrobe has a natural color difference, and its color and texture have certain differences. The appearance of the solid wood skinned wardrobe is very small, and its texture is clear and even better than the solid wood wardrobe. Consumers can use the texture and knots of solid wood to see the corresponding positions on the exterior and back, respectively. If the correspondence is good, it is a pure solid wood cabinet door. In addition, look at the knot is also a good way to identify pure wood: look at the location of the side of the scar, and then find the corresponding texture on the other side.

2, the use of wood cross section

For the identification of the wardrobe combined with the wood and wood, it is generally said that the large-area positions such as the wardrobe frame and the laminate, the drawer inner panel, etc. are artificial panels. If the manufacturer puts the solid wood skin on the artificial board, although the surface is smooth and the durability is improved, the two sides of the board will be found to intersect the texture wood grain, which is not the normal growth direction of the tree. This is the main identification method.

3, see the nail hole position during installation

Some frames use solid wood, side panels, shelves, etc., which use veneer-coated particleboard or MDF wardrobes. The center of the panels is actually plywood or various waste wood. This kind of wardrobe is difficult to identify when looking at the sample, but when you install it after entering the field, you can see the position of the nail hole. If the particle board has wood chips, the MDF will be pulpy. Consumers can use this feature. Identification.

4, using the feel and smell identification

Consumers can tap a few times on the wooden surface, the solid wood material will make a crisper sound, while the artificial board will have a low sound. In addition, the solid wood skin feels very textured, and the general artificial paper skin feels dry. The most common but very effective method is to smell the smell of the closet at close range. Most wood has the aroma of tree species, pine has a rosin flavor, cedar has a light fragrance, and eucalyptus has a distinct eucalyptus taste, but fiberboard and MDF have a strong pungent odor, especially in cabinet doors or drawers. Inside, it smells easier to distinguish.

In addition, the website gives special tips and suggestions:

To choose a solid wood wardrobe, you must first look at the material. For example, mahogany, the price of different tree species is different. The higher the grade of solid wood used, the better the process, and the higher the price of the wardrobe. Generally speaking, in terms of price, the price of the same wooden, all-solid wood wardrobe is much higher than the price of imitation wood and wood-based panels combined with wardrobes. However, the price of some well-made and novel style panel wardrobes may far exceed the price of rough wood wardrobes.

How to identify whether a door panel or partition is made of solid wood? The key lies in the wood grain and the knot, which is the method disclosed by the industry to identify whether the whole piece of solid wood. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door.

Also look at the knot is also a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side. In addition, the identification panel wardrobe also has a small trick, which is to carefully observe the hinge groove and the eye-opening, and expose the internal structure, so it can be seen whether the particle board or the medium density board is used.

Silicone Plate

Silicone Plate,Silicone Suction Plate,Silicone Divided Plate,Suction Silicone Plate

MeMe Baby Product (GZ) LLC , https://www.kupbo.com